MWDMG0050002219

Green (1480 nm Plus Supervisory)/ 1550 nm Micro-Optic WDM MWDMG0050 Series Product Description Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thin-film filter technology and patented athermal platform for optical device. The MWDM device is used to combine (or separate) 1550 nm signals with (or from) a 1480 nm pump signal plus the1510 nm supervisory channel.This device offers very flat and wide passband, low insertion loss, and high isolation which makes it ideal for amplification, telecommunications and WDM network applications. Oplink MWDM devices are Bellcore GR-1221 qualification tested and complied with industry green initiatives such as Rohs and WEEE. All Oplink products are epoxyfree in the optical path. Performance Specificationns MWDMG0050 Series Min Typical Max Unit Features Pass Channel Wavelength Range λ1 Reflection Channel Wavelength Range λ2 Insertion Loss * Isolation Passband Ripple Directivity Return Loss Polarization Dependent Loss Polarization Mode Dispersion Maximum Power Handling Fiber Type Operating Temperature Storage Temperature Package Dimensions ** 250 μm Bare Fiber 900 μm Loose Tube Pass Channel @ λ1 Reflect Channel @ λ2 Reflect Channel @ λ1 Pass Channel @ λ2 1465 1540 1515 1575 0.7 0.5 nm nm dB dB  Environmental Green Plan Compliance  Wide Operating Wavelength Range  Low Insertion Loss  High Channel Isolation  Ultra Flat Wide Passband  Highly Stable & Reliable  Epoxy-free Optical Path 12 30 0.30 50 50 0.1 0.05 500 Corning SMF-28 0 to +70 -40 to +85 P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 dB dB dB dB ps mW °C °C mm Applications  Fiberoptic Amplifiers  System Monitoring  Fiberoptic Instruments  Laboratory R&D Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. R03.20081117 Green (1480nm Plus Supervisory)/ 1550nm Micro-Optic WDM MWDMG0050 Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: 250 µm bare fiber P2: 900 µm loose tube 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG 0 0 5 0 0 0 Wavelength 1500 nm pass = 0050 Fiber Length* 0.5 meter = H 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Package & Fiber Jacket P1 + 250 μm bare fiber = 11 P2 + 900 μm loose tube = 22 * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R03.20081117 Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules