MWDMG13CS0H222

Green 1310nm/CWDM Micro-Optic WDM MWDMG13CS Series Product Description Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thin-film filter technology and patented athermal platform for optical device. The MWDM13CS is used to combine or separate1310nm band and CWDM signals. This device offers very flat and wide passband, low insertion loss, and high isolation, which make it ideal for CWDM Network applications and Optical Amplification Systems. Oplink MWDM devices are Bellcore GR-1221 qualification tested and complied with industry green initiatives such as Rohs and WEEE. All Oplink products are epoxy-free in the optical path. Performance Specificationns MWDMG13CS Series Min Max Unit Features Pass Channel Wavelength Range λ1 Reflection Channel Wavelength Range λ2 Insertion Loss * Type 13CS Type CS13 Type 13CS Type CS13 1260 1460 1460 1260 1360 1620 1620 1360 0.7 0.7 : High Isolation 0.5 : Standard nm nm nm nm dB dB dB dB  Environmental Green Plan Compliance  Wide Operating Wavelength Range  Compact Size  Low Insertion Loss  High Channel Isolation  Ultra Low PDL and PMD  Highly Stable & Reliable  Epoxy-free Optical Path Applications Pass Channel @ λ1 Reflect Channel @ λ2 Reflect Channel @ λ1 Pass Channel @ λ2 Passband Ripple Directivity Return Loss Polarization Dependent Loss Polarization Mode Dispersion Maximum Power Handling Fiber Type Operating Temperature Storage Temperature Package Dimensions ** 250 μm Bare Fiber 900 μm Loose Tube 0 to +70 -40 to +85 50 50 30 : High Isolation 15: Standard 40 Isolation 0.3 dB dB dB 0.1 0.05 500 Corning SMF-28 dB ps mW °C °C mm  Bi-directional WDM Systems  Uni-directional WDM Systems  System Monitoring  Transmitters & Fiber  Laboratory R&D P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. R03.20081106 Green 1310nm/CWDM Micro-Optic WDM MWDMG13CS Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: 250µm bare fiber P2: 900µm loose tube 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG 0 Wavelength 1300nm pass = 13CS CWDM pass = CS13 Grade High Isolation = H Standard = S Fiber Length* 0.5 Meter = H 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Package & Fiber Jacket P1 + 250μm bare fiber = 11 P2 + 900μm loose tube = 22 * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R03.20081106 Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules