MWDMG1598100014

Green 980/1550 nm Micro-Optic WDM MWDMG1598 Series Product Description Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thin-film filter technology and metal bonding micro optics packaging. This device offers very flat and wide passband, low insertion loss, and high isolation which makes it ideal for combining pump(980nm) and signal light(1550nm) in Optical Fiber Amplifier Systems. In DWDM systems, this component is used in high-power applications. All Oplink products are epoxy-free in the optical path. Oplink MWDM devices are Bellcore GR-1221 qualification tested. Performance Specificationns MWDMG1598 Series Min Max Unit Features Pass Channel Wavelength Range λ1 Reflection Channel Wavelength Range λ2 Insertion Loss * Isolation Passband Ripple Directivity Return Loss Polarization Dependent Loss Polarization Mode Dispersion Maximum Power Handling Operating Temperature Storage Temperature Fiber Type Package Dimensions ** Port 1 & 3 Port 2 250 μm bare fiber 900 μm loose tube Pass Channel @ λ1 Reflect Channel @ λ2 Reflect Channel @ λ1 Pass Channel @ λ2 1520 965 1610 995 1.0 0.6 nm nm dB dB  Environmental Green Plan Compliance  Wide Operating Wavelength Range  Low Insertion Loss  High Channel Isolation  Ultra Flat Wide Passband  Highly Stable & Reliable  Epoxy-free Optical Path 18 30 0.2 55 50 0.1 0.05 500 0 to +70 -40 to +85 Corning Flexcore 1060 Corning SMF-28 P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 dB dB dB dB ps mW °C °C Applications  Fiber Amplifiers  WDM Systems mm Note: * All spec excluding connectors. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. *** The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. R01.20081107 Green 980/1550 nm Micro-Optic WDM MWDMG1598 Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: SMF-28 250µm bare fiber P2: 900µm loose tube 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG 1 5 9 8 0 0 0 Wavelength Package Type 250μm bare fiber = 1 900μm loose tube = 2 Fiber Length* 0.5 Meter = H 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R01.20081107 Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules