MWDMGCB000022H7

Green C Band Red/Blue Pass Micro-Optic WDM MWDMGCR/CB Series Product Description Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thin-film filter technology and patented athermal platform for optical device. This device offers flat and wide passband, low insertion loss, and high isolation, which make this device ideal for high-power Optical Amplification Systems and DWDM Network applications. Oplink MWDM devices are Bellcore GR-1221 qualification tested and complied with industry green initiatives such as Rohs and WEEE. All Oplink products are epoxy-free in the optical path. Performance Specificationns MWDMGCR/CB Series Min Typical Max Unit Features Pass Channel Wavelength Range λ1 Reflection Channel Wavelength Range λ2 Insertion Loss * Isolation Passband Ripple Directivity Return Loss Polarization Dependent Loss Polarization Mode Dispersion Maximum Power Handling Fiber Type Operating Temperature Storage Temperature Package Dimensions ** Type CR Type CB Type CR Type CB 1547.4 1530.0 1530.0 1547.4 1561.0 1543.2 1543.2 1561.0 0.8 0.5 nm nm nm nm dB dB  Environmental Green Plan Compliance  Wide Operating Wavelength Range  Low Insertion Loss  High Channel Isolation  Ultra Flat Wide Passband  Highly Stable & Reliable  Epoxy-free Optical Path Pass Channel @ λ1 Reflect Channel @ λ2 Reflect Channel @ λ1 Pass Channel @ λ2 12 20 0.30 50 50 0.1 0.05 500 Corning SMF-28 0 to +70 -40 to +85 250 μm Bare Fiber 900 μm Loose Tube P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 dB dB dB dB ps mW °C °C mm Applications  Fiberoptic Amplifiers  System Monitoring  Fiberoptic Instruments  Laboratory R&D Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. *** The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. R03.20081118 Green C Band Red/Blue Pass Micro-Optic WDM MWDMGCR/CB Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: SMF-28 250 µm bare fiber P2: 900 µm loose tube 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG C 0 0 0 0 Band C band = C Wavelength Red pass = R Blue pass = B Fiber Length* 0.5 meter = H 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Package & Fiber Jacket P1 + 250 μm bare fiber = 11 P2 + 900 μm loose tube = 22 * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R03.20081118 Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules