OFMS1800E0022H8

OFMS Series 1x8 Optical Fiber Switches OFMS 1x8 Series Product Description The OFMS series 1x8 optical fiber switch is based on Oplink’s patented opto-mechanical switches with unique prism design to improve the switch repeatability and stability. The switches are designed for use in optical channel monitoring, optical cross-connect systems, and network switching for fault protection applications. Oplink provides customized design to meet special control and applications. Also, Oplink offers modular assemblies that integrate other components to form a full function module or subsystem. Performance Specificationns Parameters Value Unit Operating Wavelength Range Insertion loss Return Loss 2 1,2 1528~1610 < 2.0 < 0.2 > 50 > 50 ± 0.05 < 20 300 Corning SMF-28 0 ~70 -40 ~ 85 +5 < 250 > 10 7 Latching CMOS 3 bit, Latching Fixed male connector mates with BERG 91763-110 Female Receptacle 86.0 (L) x 80.0 (W) x 22.0 (H) nm dB dB dB dB dB ms mW °C °C V mA Cycles Applications Features Polarization Dependent Loss Channel Cross Talk Repeatability Switching Time Optical Power Handling Fiber Type Operating Temperature Storage Temperature Switch Power Supply Voltage (Vcc1) Switch Driving Current at 5V Power Supply Durability Switch Type Control Interface Control Electrical Connector Type Dimensions (P2 package)  Wide Operating Wavelength Range  Fast Switch Speed  Highly Stable & Reliable  Low Insertion Loss  Low PDL  Compact  Network Monitoring and Switching  Network Protection and Restoration  Instrument, Testing and Measurement mm Notes: 1) Insertion loss is specified at 23°C over all wavelength range and all SOP. 2) Insertion loss and return loss: without connectors. R02.20090528 OFMS Series 1x8 Optical Fiber Switches OFMS1x8 Series Mechanical Drawing / Package Dimensions (dimension in mm) 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com Electrical Connector Configuration Optical Path Electrical Drive Control Input Status Sensor PIN# NAME FUNCTION 1 Vcc1 Switch Power Supply 2 Agnd Switch Power Return 000 1 3 D0 4 D1 Port Selection, Data bus 5 D2 6 Start Start Strobe 011 4 100 5 7 Ready Low= Ready 101 6 8 Error Low= Error 110 7 9 Dgnd CMOS Ground 111 8 10 Vcc2 CMOS Power Supply Control (D2, D1, D0) Selected Port 001 2 010 3 Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. OFMS 1 8 0 0 E 0 0 2 Wavelength C+L bands = E Package Type P2 = 2 Fiber Length 0.5meter= H 1.0meter= 1 1.5meter= 5 2.0meter= 2 Connector Type None = 1 FC/PC=2 FC/SPC=3 FC/APC=4 SC/PC=5 SC/SPC=6 SC/APC=7 ST=8 LC=9 MU=A Fiber Type SMF-28 250µm =1 SMF-28 w/ 900µm loose tube =2 R02.20090528 Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules