TCIHG1550D1

Green 1550(1585)nm Tap Coupler/ Isolator Hybrid Combination TCIHG Series Product Description Oplink’s Tap Coupler/Isolator Hybrid Combination (TCIH) is based on patented athermal platform for optical device. This product is a combination of a partial reflection filter and a polarization insensitive optical isolator that features ultra low insertion loss, super thermal stability, and unparallel reliability. The technology is a lead-free packaging platform and no epoxy in the optical path. Performance Specificationns TCIHG Series Specifications Single Stage Dual Stage Unit Operating Wavelength Range Standard Port Insertion Loss [1] Tap Port C-band: 1528 ~ 1564 L-band: 1570 ~ 1605 < 0.8 < 1.0 1% Tap Ratio: 19.2~21.0 2% Tap Ratio: 16.2~18.0 5% Tap Ratio: 12.2~14.0 10% Tap Ratio: 9.6~10.8 < 0.3 > 21 < 0.1 < 0.25 > 55 > 50 < 500 Corning SMF-28 0 to +70 -40 to +85 P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 < 0.05 < 0.4 > 38 nm dB dB dB ps dB dB dB dB mW °C °C mm Features  Wide Operating Wavelength Range  Compact Size  Low Insertion Loss  High Isolation  Ultra Low PDL & PMD  Highly Stable & Reliable  Epoxy-free Optical Path Wavelength Dependent Loss Reverse Direction Isolation (over operating wavelength range, 0~70°C, all SOP) Polarization Dependent Loss Polarization Mode Dispersion Directivity Return Loss Maximum Power Handling Fiber Type Operating Temperature Storage Temperature Package Dimensions [3] Applications  Fiberoptic Amplifiers  CATV Fiberoptic Links  System Monitoring  Fiberoptic Instruments  Transmitters and Fiber Lasers  Laboratory R&D Note: [1] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. Add 0.3dB on signal port IL for 10% tapping case. [2] All the parameters are excluding connectors. [3] The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified. R02.20080612 Oplink Communications, Inc. Green 1550(1585)nm Tap Coupler/ Isolator Hybrid Combination TCIHG Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: SMF-28 250µm bare fiber 34.0 mm 1 COMM PASS COMMON Ø 5.5 mm PASS 2 3 REFLECT 54.0mm TAP P2: 900µm loose tube 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com 40.0 mm 1 COMMON Ø 5.5 mm PASS 2 3 REFLECT 60.0mm Ordering Information TCIHG Wavelength 1550 nm= 1550 1585 nm= 1585 Stage Single Stage = S Dual Stage = D Tap Ratio 1% = 1 2% = 2 5% = 5 10% = 0 Fiber Length* 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Package & Fiber Jacket P1 + 250μm bare fiber = 11 P2 + 900μm loose tube = 22 * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R02.20080612 Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules