UWDM591SB

Ultra Hi-Rel Undersea Component Family UWDM59 Series Fused Single-Mode WDM (980/1550 nm) Product Description Oplink’s 980/1550 nm fused single-mode wavelength division multiplexers are manufactured using the proven fused biconical taper technology and Oplink’s stringent quality procedures. With low insertion loss and flat passband, this deviceis ideal for combining pump (980 nm) and signal light at 1550 nm in optical fiber amplifiers. Please contact our Oplink OEM design team for further information. Oplink’s Ultra Hi-Rel family of optical components are available for your undersea applications. Please contact us with your requirements. Port 1 In L Port 2 Signal Port 4 (terminated for 1x2 configuration) Ø Port 3 Pump Performance Specificationns UWDM59 Series Premium Grade A Grade B Unit Features  Very High Reliability  Ultra Low Insertion Loss  Ultra High Isolation  Low Polarization Sensitivity  High Directivity  High Stable & Reliable  Bidirectional Operating Wavelength (970 - 990nm / 1535 - 1565nm) 970 - 990 / 1535 - 1565 < 0.1 < 0.2 > 20 < 0.05 < 0.1 > 55 500 - 10 to + 70 - 40 to + 85 HI1060 FLEX & HI980 P1: 250 µm bare fiber P2: 900 µm loose tube (ø) 3.0 x (L) 54.0 (ø) 3.0 x (L) 60.0 < 0.1 < 0.3 nm dB dB dB dB mW °C °C Insertion Loss Isolation Polarization Dependent Loss Directivity Maximum Power Handling Operating Temperature Storage Temperature Fiber Type Package Dimensions ** mm Applications Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified.  Undearsea R03.20081120 Ultra Hi-Rel Undersea Component Family Fused Single-Mode WDM (980/1550 nm) UWDM59 Series Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. UWDM 5 9 S 0 0 Wavelength 1550/980 nm= 59 Type Standard= S Premium Grade = P A Grade = A B Grade = B Grade Fiber Length 0.5 Meter = H 1.0 Meter = 1 * 1.5 Meters = 5 2.0 Meters = 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Configuration 1x2 = 1 2x2 = 2 Package & Fiber Type P1+ HI1060 = 16 P1+ HI980 = 19 P2+ HI1060 = 26 P2+ HI980 = 29 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com Notes : * 1 meter is standard. The lead time for special fiber length will be longer. R03.20081120 Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules