UWFC6102P

Ultra Hi-Rel Undersea Component Family UWFC Series Single Window Single-Mode Wideband Fiber Coupler (1x2,2x2) Product Description Oplink’s single-window wideband couplers split or combine light with exceptional performance over a wide bandwidth. These couplers have very good uniformity, low excess loss and very low polarization sensitivity. All devices are supplied with all pertinent measurement data. Please contact our Oplink OEM design team for further information. Oplink’s Ultra Hi-Rel family of optical components are available for your undersea applications. Please contact us with your requirements. Port 1 In L Port 2 Signal Port 4 (terminated for 1x2 configuration) Ø Port 3 Pump Performance Specificationns UWFC Series Premium Grade A Unit Features Coupling Ratio Operating Wavelength Uniformity (50/50) Insertion Loss Split Ration : 50/50 Split Ration : 3/97 Split Ration : 2/98 Split Ration : 1/99 1/99 to 50/50 1270 ~ 1350 / 1510 ~ 1590 / 1600 ~ 1640 55 < 500 - 10 to + 70 - 40 to + 85 P1: 250 µm bare fiber P2: 900 µm loose tube P3: 3 mm cable (ø) 3.0 x (L) 54.0 (ø) 3.0 x (L) 60.0 (L)96 x (W)12 x (H)6.4 < 0.8 < 3.7 < 17.0/0.45 < 19.5/0.35 19.0 ~ 21.5 / 0.25 < 0.20 < 0.13 < 0.002 dB dB dB dB/°C dB mW °C °C mm nm  Wavelength Independent  Low Polarization Sensitivity  High Directivity  High Stable & Reliable Temperature Dependent Loss Polarization Dependent Loss Temperature Sensitivity Directivity Maximum Power Handling Operating Temperature Storage Temperature Package Dimensions ** Applications  Undearsea Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. R03.20081120 Ultra Hi-Rel Undersea Component Family Single Window Single-Mode Wideband Fiber Coupler (1x2, 2x2) UWFC Series Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. UWFC 0 0 Tap Ratio Type 1x2 = 1 2x2 = 2 50/50 = 50 3/97 = 03 2/98 = 02 1/99 = 01 Grade Premium Grade = P A Grade = A Fiber Length 0.5 meter = H 1.0 meter = 1 * 1.5 meters = 5 2.0 meters = 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Wavelength 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com 1310 nm = 3 C band = 5 L band = 6 Package & Fiber Type P1 + 250 μm bare fiber = 11 P2 + 900 μm loose tube = 22 P3 + 3 mm cable = 33 Notes : * 1 meter is standard. The lead time for special fiber length will be longer. R03.20081120 Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules