OMH3020

High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) Features: • • • • • • Designed for non-contact switching operations Operates over a broad range of supply voltages Excellent temperature stability operates in harsh environments Suitable for military and space applications Processing patterned after class B or S of MIL-STD-883 0.50” (12.700 mm) lead length Ceramic Package These Hall-effect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic® silicon chip. Included on-chip is a bandgap voltage regulator that allows operation with a wide range of supply voltages. These devices feature logic level output and provide up to 21 mA of sink current. This allows direct driving of more than 7 TTL loads or any standard logic family using power supplies ranging from 4.5 to 24 volts. Output amplitude is constant at switching frequencies from DC to over 200 kHz. The Uni-Polar turns on with a (logic level “0”) after a sufficient magnetic field from the south pole of a magnet approaches the symbolized face of the device (operating point) and turns off (logic level “1”) after the magnetic field reaches a minimum value. The Bi-Polar device turns on (logic level “0”) in the presence of a magnetic south pole and turns off (logic level “1”) when subjected to a magnetic north pole. Both magnetic poles are necessary for operation for Bi-Polar devices. This feature makes these sensors ideal for applications in non-contact switching operations, brushless DC motors and for use with multiple pole magnets. B and S devices are processed to OPTEK’s military screening program patterned after MIL-STD-883. This product is not guaranteed to meet all radiation hardness requirements of MIL-STD-883. Contact your local representative or OPTEK for more information. Description: Applications: • • • Non-contact switching operations Brushless DC motors Multiple pole magnets • • • Non-contact reflective object sensor Assembly line automation Machine automation • • • Machine safety End of travel sensor Door sensor VCC 1 Vcc Voltage Regulator Hall Element Output Output 3 Magnet on this Side Ground 2 Ground Pin # 1 2 3 Description VCC Ground Output [MILLIMETERS] INCHES DIMENSIONS ARE IN: OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B.1 06/07 Page 1 of 7 High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Supply Voltage, VCC Storage Temperature Range, TS Operating Temperature Range, TA Lead Soldering Temperature (1/8 in. (3.2 mm) from case for 5 seconds with soldering iron) Output ON Current, ISINK Output OFF Voltage, VOUT Magnetic Flux Density, B Notes: (1) Heat sink leads during hand soldering. 25 V -65°C to +150°C -55°C to +125°C 260°C(1) 25 mA 25 V Unlimited Part Number OMH090B Hi-Reliability Operate Point Release Point Hallogic® Gauss Gauss Sensor Min / Typ / Max Min / Typ / Max 50/90/180 30 / 60 / 160 Hysteresis Gauss Min / Typ / Max 5 / 30 / 70 VCC (Volts) Lead Min / Max Length OMH090S OMH3019B 175 / 420 / 500 OMH3019S OMH3020B OMH3020S 4.5 / 24.0 OMH3040B 70 / 150 / 200 OMH3040S OMH3075B 50 / 150 / 250 OMH3075S OMH3131B OMH3131S Bi-Polar Latching 20 / 60 / 95 10 / 45 / 85 5 / 15 / 40 -250 / -150 / -50 100 / 300 / 500 50 / 115 / 180 110 / 35 / 60 0.50” Uni-Polar Non-Latching 70 / 220 / 350 50 / 165 / 330 15 / 55 / 200 125 / 220 / 420 30 / 100 / 155 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.1 06/07 Page 2 of 7 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted) OMH090, OMH090B, OMH090S Uni-Polar SYMBOL BOP BRP BH ICC VOL IOH tr tf PARAMETER Magnetic Operate Point(1) Magnetic Release Point Magnetic Hysteresis Supply Current Output Saturation Voltage Output Leakage Current Output Rise Time Output Fall Time MIN 45 70 20 30 25 5 5 TYP 90 65 5 125 0.50 0.13 0.14 MAX 210 200 180 180 170 95 70 9 11 5 300 400 10 11 12 1.00 1.00 UNITS -55°C Gauss +25°C +125°C Gauss Gauss mA mV µA µs µs -55°C & +25°C +125°C -55°C +25°C & +125°C -55°C,VCC = 24 V, Output On, B≤250 Gauss +25° +125°C -55°C,VCC = 4.5 V, IOL = 30 mA,B≥250 Gauss +25°C & +125°C -55°C,VCC = 24 V, VOUT =24 V, B≤250 Gauss +25° +125°C RL = 820 Ω, CL = 20 pF, VCC = 14 V (guaranteed not tested) TEST CONDITIONS Electrical Characteristics (Vcc = 4.5 V to 24 V, TA = 25° C unless otherwise noted) OMH3019, OMH3019B, OMH3019S Uni-Polar SYMBOL BOP BRP BH ICC VOL IOH tr tf PARAMETER Magnetic Operate Point(1) Magnetic Release Point Magnetic Hysteresis Supply Current Output Saturation Voltage Output Leakage Current Output Rise Time Output Fall Time MIN 175 125 100 30 20 TYP 300 235 65 5 125 0.10 0.13 0.14 MAX 500 575 420 155 9 300 1.0 1 1 UNITS Gauss Gauss Gauss mA mV µA µs µs TEST CONDITIONS +25°C -55°C & +125°C +25°C -55°C & +125°C +25°C -55°C to +125°C VCC = 24 V, Output On, B ≤ 50 Gauss VCC = 4.5 V, IOL = 15 mA, B ≥ 500 Gauss VCC = 24 V, VOUT = 24 V, B < 50 Gauss RL = 460 Ω, CL = 20 pF, VCC = 12 V (guaranteed not tested) Notes: (1) South pole facing symbolized surface. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B.1 06/07 Page 3 of 7 High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted) OMH3020, OMH3020B, OMH3020S Uni-Polar SYMBOL BOP BRP BH Icc VOL IOH tr tf PARAMETER Magnetic Operate Point(1) Magnetic Release Point Magnetic Hysteresis Supply Current Output Saturation Voltage Output Leakage Current Output Rise Time Output Fall Time MIN 50 25 10 10 TYP 230 180 50 4 100 0.10 0.21 0.10 MAX 350 425 7 400 10 1 1 UNITS Gauss Gauss Gauss mA mV µA µs µs TEST CONDITIONS +25°C -55°C & +125°C +25°C -55°C & +125°C +25°C -55°C & +125°C VCC = 24 V, Output On, B ≤ 50 Gauss VCC = 4.5 V, IOL = 15 mA, B ≥ 350 Gauss VCC = 24 V, VOUT = 24 V, B ≤ 50 Gauss RL = 820 Ω, CL = 20 pF, VCC = 12 V (guaranteed not tested) Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted) OMH3040, OMH3040B, OMH3040S Uni-Polar SYMBOL BOP BRP BH Icc VOL IOH tr tf PARAMETER Magnetic Operate Point(1) Magnetic Release Point Magnetic Hysteresis Supply Current Output Saturation Voltage Output Leakage Current Output Rise Time Output Fall Time MIN 70 75 50 25 20 20 TYP 150 115 35 4 100 0.10 0.21 0.10 MAX 200 270 180 210 7 8 400 11 10 12 1 1 UNITS Gauss Gauss Gauss mA mV µA µs µs TEST CONDITIONS +25°C -55°C & +125°C +25°C -55°C & +125°C +25°C -55°C & +125°C +25°C, VCC = 24 V, Output On, B ≤ 250 Gauss -55°C & +125°C VCC = 4.5 V, IOL = 20 mA, B ≥ 250 Gauss -55°C +25°C, VCC = 24V, VOUT = 24V, B ≤ 250 Gauss +125°C RL = 820 Ω, CL = 20 pF, VCC = 12 V (guaranteed not tested) Notes: (1) South pole facing symbolized surface. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.1 06/07 Page 4 of 7 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted) OMH3075, OMH3075B, OMH3075S Bi-Polar Latching SYMBOL BOP BRP BH ICC VOL IOH tr tf PARAMETER Magnetic Operate Point(1) Magnetic Release Point Magnetic Hysteresis Supply Current Output Saturation Voltage Output Leakage Current Output Rise Time Output Fall Time MIN 50 25 -250 -275 100 50 TYP 150 -150 200 4 100 0.10 0.21 0.10 MAX 250 275 -50 -25 500 7 8 500 400 400 1.0 1 1 UNITS Gauss Gauss Gauss mA mV µA µs µs TEST CONDITIONS +25°C -55°C & +125°C +25°C -55°C & +125°C +25°C -55°C & +125°C +25°C, VCC = 24 V, Output On, B ≤ 250 Gauss -55°C & +125°C -55°C +25°C, VCC = 4.5 V, IOL = 20 mA, B ≥ 250 Gauss +125°C VCC= 24 V, VOUT = 24 V, B ≤ 250 Gauss RL = 820 Ω, CL = 20 pF, Vcc = 12 V (guaranteed not tested) Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25° C unless otherwise noted) OMH3131, OMH3131B & OMS3131S Uni-Polar SYMBOL BOP BRP BH ICC VOL IOH tr tf PARAMETER Magnetic Operate Point(1) Magnetic Release Point Magnetic Hysteresis Supply Current Output Saturation Voltage Output Leakage Current Output Rise Time Output Fall Time MIN 20 10 10 5 5 5 TYP 4 100 0.10 0.21 0.10 MAX 95 150 85 145 40 145 7 400 10 1 1 UNITS Gauss Gauss Gauss mA mV µA µs µs TEST CONDITIONS +25°C -55°C to +125°C +25°C -55°C to +125°C +25°C -55°C to +125°C VCC = 24 V, Output On, B > 250 Gauss VCC = 4.5 V, IOL = 15 mA, B ≥ 250 Gauss VCC = 24 V, VOUT = 24 V, B ≤ 0 Gauss RL = 820 Ω, CL = 20 pF, Vcc = 12 V (guaranteed not tested) Notes: (1) South pole facing symbolized surface. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B.1 06/07 Page 5 of 7 High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) OMH090, OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S) Magnetic Operate & Release Points vs Temperature 180 160 140 OMH3040 Operate Manetic Flux Level - Gauss 120 100 80 OMH3040 Release OMH090 Operate OMH090 Release 60 40 20 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 OMH3131 Operate OMH3131 Release Temperature (°C) Magnetic Operate & Release Points vs Temperature 400 OMH3019 Operate 300 OMH3019 Manetic Flux Level - Gauss 200 OMH3020 Operate OMH3020 Release OMH3075 Operate 100 0 -100 OMH3075 Release -200 -60 -40 -20 0 20 40 60 80 100 120 140 160 Temperature (°C) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.1 06/07 Page 6 of 7 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) OMH090, OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S) Rise and Fall Time vs Temperature 350 B OP B RP 300 Magnetic Field 250 Typical Time (ns) Rise Time Fall Time V OH 200 90% Tf Tr 90% V OL 10% 10% 150 Vcc 1 820 Ohm 100 Output 3 20 pf U.U.T. Ground 2 50 0 -40°C 0°C 40°C 80°C 120°C 150°C Temperature (°C) ICC vs Temperature 9.0 8.0 Saturation Voltage vs Temperature 0.40 0.35 Typical Saturation Voltage (V) 7.0 6.0 Icc ON (mA) Icc OFF (mA) RL = 820 ohms 0.30 Typical Icc (mA) 5.0 4.0 3.0 2.0 1.0 0.0 -40°C 0°C 40°C 80°C 120°C 150°C 0.25 0.20 0.15 0.10 -40°C 0°C 40°C 80°C 120°C 150°C Temperature (°C) Temperature (°C) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B.1 06/07 Page 7 of 7