OPA729BD

OPA729 Series 10 Watt Light Bar on Anotherm Linear Heat Spreader OPA729 Series • • • • • • 10, 1 watt LEDs per strip, can be linked with other OPA729’s Mono-color per strip (Blue, Green, Red, Yellow, White) Two component beam angle options (120° or 40°) Power connected to either end Universal connector (Tyco 2-292173-2 mates with 173977-2) RoHS Compliant OPA729_ (120° Beam Angle) Product Photo Here OPA729_D (40° Beam Angle) The OPA729 Series are designed for areas where lighting intensity and reliability are essential. The light beam angles of 40° and 120° are ideal for illuminating small and medium size areas while requiring minimal space. A patented substrate is used to ensure the best heat dissipation of any light assembly in the industry. For custom colors and design contact your OPTEK representative. Electrical / Optical Characteristics: TA=25°C, IF=700mA Part Number OPA729Y OPA729B OPA729G OPA729R OPA729W OPA729YD OPA729BD OPA729GD OPA729RD OPA729WD Typical Forward Voltage (V) 12.5 18.0 18.0 12.5 18.0 12.5 18.0 18.0 12.5 18.0 Luminous Flux (lm) 350 90 480 260 480 350 90 480 260 480 40° 120° Beam Angle Color Yellow Blue Green Red White Yellow Blue Green Red White Dominant Wavelength 587 nm 470 nm 530 nm 625 nm 6,500°K 587 nm 470 nm 530 nm 625 nm 6,500°K See OVSP_BCR4 for component specifications See OVSP_4CR44 for component specifications OPA729_ + Voltage RoHS OPA729_D Ground DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 1 of 1