OPA730

OPA730 Series 12 Watt Light Ring on Anotherm Linear Heat Spreader OPA730 Series • • • • • 12, 1 watt LEDs per ring Mono-color per strip (Blue, Green, Red, Yellow, White) Two component beam angle options (120° or 40°) Universal connector (Tyco 2-292173-2 mates with 173977-2) RoHS Compliant OPA730_ (120° Beam Angle) Product Photo Here OPA730_D (40° Beam Angle) The OPA730 Series are designed for areas where lighting intensity and reliability are essential. The light beam angles of 40° and 120° are ideal for illuminating small and medium size areas while requiring minimal space. A patented substrate is used to ensure the best heat dissipation of any light assembly in the industry. For custom colors and design contact your OPTEK representative. Electrical / Optical Characteristics: TA=25°C, IF=700mA Part Number OPA730Y OPA730B OPA7309G OPA730R OPA730W OPA730YD OPA730BD OPA730GD OPA730RD OPA730WD Typical Forward Voltage (V) 15.0 21.6 21.6 15.0 21.6 15.0 21.6 21.6 15.0 21.6 Luminous Flux (lm) 420 108 576 312 576 420 108 576 312 576 40° 120° Beam Angle Color Yellow Blue Green Red White Yellow Blue Green Red White + Voltage Dominant Wavelength 587 nm 470 nm 530 nm 625 nm 6,500°K 587 nm 470 nm 530 nm 625 nm 6,500°K Ground OPA730_ See OVSP_BCR4 for component specifications OPA730_D See OVSP_4CR44 for component specifications DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 1 of 1