OPB715Z

Photologic® Reflective Object Sensor OPB715Z, OPB716Z, OPB717Z, OPB718Z Features: • • • • • Focused for maximum sensitivity .5” (12.700 mm) sensing distance Panel mount Choice of output configurations 18” (457.200 mm) minimum wire length Product Photo Here Description: The OPB715Z series reflective assembly consists of a GaALAs LED and a Photologic® sensor enclosed in an IR transmissive housing. The sensor is characterized to detect paper at 0.5” (12.7 mm). The sensor has a wide operating distance range and is capable of detecting reflective objects at other distances. The reflective distance depends on the reflectance materials. The sensor’s panel-mount plastic housing shields stray light and is terminated with 18” (457 mm) UL approved 26 AWG wire leads. The LED is current limited internally for design convenience. Its output can be specified as either TTL Totem-Pole or TLL Open-Collector. Inverted output options are available for either output configuration. Applications: • • • • • Focused for maximum sensitivity 0.5” (12.700 mm) sensing distance Panel mount Choice of output configurations 18” (457.200 mm) minimum wire length Part Number OPB715Z OPB716Z OPB717Z OPB718Z LED Peak Wavelength Sensor Photologic® Totem-Pole Open-Collector Inv-Totem-Pole Inv-Open-Collector Reflection Distance Inch (mm) Lead Length / Spacing 18" / 26 AWG Wire 890 nm 0.50" OPB715 Buffered Totem-Pole VCC OPB716 Buffered Open Collector VCC OUT AMP OUT AMP GND GND OPB717 Inverted Totem-Pole VCC OPB718 Inverted Open-Collector VCC OUT AMP OUT [ MILLIMETERS] DIMENSIONS ARE IN: INCHES GND GND AMP Color-Pin # Orange White Violet Description VCC Output Ground RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 1/07 Page 1 of 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Photologic® Reflective Object Sensor OPB715Z, OPB716Z, OPB717Z, OPB718Z Absolute Maximum Ratings (TA=25°C unless otherwise noted) Storage & Operating Temperature Range Supply Voltage, VCC (not to exceed 2 seconds) Power Dissipation (1) -40° C to +85° C 10 V 300 mW 35 V Output Voltage (Open-Collector only) Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL VCC ICCL ICCH IOH PARAMETER Operating Supply Voltage Low-Level Supply Current: High-Level Supply Current High-Level Output Current OPB716 OPB718 Short Circuit Output Current OPB715 OPB717 Low-Level Output Voltage OPB715 OPB716 OPB717 OPB718 Notes: (1) (2) (3) (4) MIN 4.75 - TYP - MAX 5.25 30 50 100 100 100 100 0.4 0.4 UNITS V mA mA µA µA µA µA V V TEST CONDITIONS VCC = 5.0 V, output open VCC = 5.0 V, output open VCC = 4.5 V, VCH = 5 V(3) VCC = 4.5 V, VCH = 5 V(4) VCC = 5.0 V, VCH = 5 V IOS VCC = 5.0 V, IOL = 12.8 mA(4) VCC = 5.0 V, IOL = 12.8 mA(3) VOL 0.4 0.4 V Derate linearly at 5.0 mW / °C above 25° C. Terminating wire is 7 strand, 26 AWG, UL 1429. Tested at d = 0.55” (12.7 mm) from a 90% diffuse, white test surface. Reference: Eastman Kodak Catalog #E 152 7795. No reflective surface. Typical - Trigger Points vs Displacement From Both Sides 0.50 0.40 0.30 0.08 Turn-ON Typical - Trigger Points vs Displacement From Top & Bottom 0.15 0.13 0.10 Turn-ON Turn-OFF 0.20 Turn-OFF 0.05 0.03 Distance (inches) 0.10 TOP 0.00 -0.10 Turn-ON Turn-OFF 0.00 -0.03 -0.05 -0.20 -0.30 Turn-OFF -0.08 -0.10 -0.40 -0.50 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.00 0.10 Turn-ON -0.13 -0.15 0.70 0.20 0.30 0.40 0.50 0.60 Distance (inches) Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 1/07 Page 2 of 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Distance (inches) FRONT FRONT Photologic® Reflective Object Sensor OPB715Z, OPB716Z, OPB717Z, OPB718Z Typical - Voltage vs Displacement Kodak 90% 1.2 Typical - Voltage vs Displacement Kodak 19% & Retroreflective 1.2 1.0 1.0 Toward 0.8 0.8 Logic Level Logic Level Toward Toward 0.6 Away 0.6 Away Away 0.4 0.4 0.2 0.2 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Distance (inches) Displacement (inches) Typical - Voltage vs Displacement Copy Paper 1.2 Typical - Voltage vs Displacement Avery Label 5160 1.2 1.0 Toward 1.0 0.8 Logic Level 0.8 Logic Level Toward 0.6 Away 0.6 Away 0.4 0.4 0.2 0.2 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Distance (inches) Displacement (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.2 1/07 Page 3 of 3