OPF371C

Product Bulletin OPF371 January 1998 Fiber Optic GaAlAs LED in SMA Receptacle Types OPF371A, OPF371B, OPF371C, OPF371D Features • Component pre-mounted and ready to use • Pre-tested with fiber to assure performance • Popular SMA style receptacle Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0 V Continuous Forward Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA(4) Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55o C to +100o C Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +85o C Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C(1) Notes: (1) RMA flux is recommended. Duration can be extended to 10 sec. max when flow soldering. (2) Graded index fiber, 50 µm core, N.A. = 0.20. (3) To convert radiant power output to dBm, use the following expression: dBm = 10 log (µW/1000). (4) Derate linearly @ 1.0 mA/o C above 25o C. (5) Prebias @ 5 mA current. LED Burn-in All LED's are subject to 100% burn-in testing. Test conditions are 96 hours at 100 mA continuous current in 25o C ambient. Description The OPF371 series LED consists of a low cost plastic cap LED, pre-mounted and aligned in an SMA receptacle. This configuration is designed for PC board or panel mounting. Includes lock washer and jam nut, two 2-56 screws, and a dust cap. The LED’ are designed to interface with s mulitmode optical fibers from 50/125 to 200/300 microns. TYPICAL COUPLED POWER into OPTICAL FIBER Fiber 50/125 µm 62.5/125 µm 100/140 µm Refractive Index Graded Graded Graded Typical Coupled Power o IF = 100 mA @ 25 C N.A. OPF371D OPF371C 0.20 0.28 0.29 0.41 7.5 µW 27 µW 60 µW 320 µW 12.5 µW 35 µW 87 µW 463 µW OPF371B 19 µW 51 µW 129 µW 606 µW OPF371A 29 µW 89 µW 200 µW 750 µW Step 200/300 µm* *PCS - Plastic Clad Silica Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 8-52 (972) 323-2200 Fax (972) 323-2396 Electrical Characteristics (TA = 25 C unless otherwise noted) SYMBOL PO VF λ p B tr tf Forward Voltage Peak Output Wavelength Spectral Bandwidth Between Half Power Points Output Rise Time Output Fall Time Types OPF371A, OPF371B, OPF371C, OPF371D o PARAMETER Radiant Power Output OPF371D OPF371C OPF371B OPF371A MIN TYP MAX UNITS 5.0 10.0 15.0 25.0 830 7.5 12.5 19.0 29.0 1.8 850 35 6.0 6.0 8.0 10.0 2.0 870 µW V nm nm ns ns TEST CONDITIONS IF = 100 mA(2) IF = 100 mA IF = 50 mA IF = 50 mA IF = 100 mA, 10%-90%(5) IF = 100 mA, 90%-10%(5) Typical Performance Curves Relative Coupled Power vs. Forward Current Forward Voltage vs. Forward Current Temperatures are stepped in 25o C increments. -50o C -50o C 100o C 100o C Temperatures are stepped in 25o C increments. Forward Current - mA Forward Current - mA Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972)323-2200 Fax (972)323-2396 8-53