OVFSB6C8

4-Pin Blue LED Lamp (7.6mm) OVFSB6C8 x x x x x Packaged in tubes Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Mono-color type Pb-free Product Photo Here The OVFSB6C8 is designed with higher forward voltage to maximize brightness and incorporates a low-profile lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low current requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This square package allows high-density arrays to form light engines. Applications x Automotive: Rear Stop/Turn Signal Lamps/Truck Marker Lamps x Mood-setting Decoration and Landscape Lighting x Special Decorative Interior/Exterior Lighting x Special Effects Stage Lighting x Illumination for Signs and Channel Letters Part Number OVFSB6C8 Material InGaN Emitted Color Blue Flux Typ. mlm 850 Lens Color W ater Clear RoHS 2,3 ANODE 1,4 CATHODE Data is subject to change without prior notice. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 1 4-Pin Blue LED Lamp (7.6mm) OVFSB6C8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 Reverse Voltage Continuous Forward Current Power Dissipation Notes: 1. Solder time less than 3 seconds at temperature extreme. 2 -40 ~ +100° C -40 ~ +100° C 260° C 5V 30 mA 100 mA 140 mW Peak Forward Current (10% Duty Cycle, PW ”  —VHF Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL lumen VF IR D PARAMETER Luminous Flux Forward Voltage Reverse Current Dominant Wavelength 50% Power Angle MIN 250 ------462 ---- TYP 850 4.0 ---470 60 MAX ---4.6 100 475 ---- UNITS mlm V µA nm deg CONDITIONS IF = 30mA IF = 30mA VR = 5V IF = 30mA IF = 30mA 2 ½ Standard Bins (IF = 30mA) Lamps are sorted to luminous flux ( V), forward voltage (VF), and dominant wavelength ( D) bins shown. Orders for OVFSB6C8 may be filled with any or all bins contained as below. Luminous Flux (mlm) X3 600-1200 400-800 250-500 460 465 470 X4 X5 D C B 475 Luminous flux is at B bin or above. Dominant Wavelength (nm) Forward Voltage (VF) Rank Voltage (V) V9 3.2–3.4 V10 3.4–3.6 V11 3.6–3.8 V12 3.8–4.0 V13 4.0–4.2 V14 4.2–4.4 V15 4.4–4.6 Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. Issue 1.0 Page 2 0505 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin Blue LED Lamp (7.6mm) OVFSB6C8 Typical Electro-Optical Characteristics Curves mA % Forward Current vs. Forward Voltage V mA Relative Luminous Flux vs. Forward Current Half Power W L = 28nm mA nm ° C Relative Luminous Flux vs. Wavelength Maximum Forward DC Current vs. Ambient Temperature 50% Power Angle: 60° V A Far Field Pattern Reverse Current vs. Reverse Voltage OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 3 4-Pin Blue LED Lamp (7.6mm) OVFSB6C8 Moisture Resistant Packaging 60/Tube Aluminum Moisture-proof Bag Desiccant Bar Code Label Issue 1.0 Page 4 0505 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin Blue LED Lamp (7.6mm) OVFSB6C8 Issue Change Description Approval Date 1.0 Initial Release R. Bailey 5/19/05 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 5