OVLAW4CB6

White High-Intensity LED Lamp (3 mm, 45° Viewing Angle) OVLAW4CB6 x x x x x High luminous intensity Blue LED + yellow phosphor Through-hole type W ater clear lens Available on tape and reel Product Photo Here The OVLAW4CB6 is a round 3 mm white high-intensity through-hole lamp with a 45° viewing angle. It is designed for wide-angle uniform light output. Applications x Indicators for medical, industrial, consumer and office equipment x Indicators for white goods and home appliances x Interior and exterior architectural and accent lighting x Signs and digital information displays, video screen non-color and RGB presentation x Automotive backlighting and indicators Part Number OVLAW4CB6 Material InGaN Emitted Color White Intensity Typ. mcd 1000 Lens Color W ater Clear RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 1 of 5 White High-Intensity LED Lamp OVLAW4CB6 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage DC Forward Current DC Forward Current Reduction Power Dissipation Lead Soldering Temperature (5 seconds maximum) 1 -40 ~ +100° C -30 ~ +85° C 5V 30 mA -0.50 mA/° C 120 mW 260° C Electrical Characteristics TA = 25oC unless otherwise noted SYMBOL PARAMETER MIN 2 TYP 1000 3.4 ---0.31 0.32 MAX ---3.9 10 ------- UNITS CONDITIONS IF = 20 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IV VFI Luminous Intensity (Axial Direction) Forward Voltage ---2.8 ---------- mcd V µA ------- IR x y Reverse Current Chromaticity Notes: 1. Under this condition: TOPR = 40 ~ 85° C. 2. Guaranteed value is 20% higher and/or lower than this value. Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown. Orders for OVLAW4CB6 may be filled with any or all bins contained as below. Luminous Intensity (mcd) Standard Bins (IF = 20 mA) A0 1500-2100 1050-1500 800-1050 B3 B4 B5 B6 C0 7 6 5 Luminous Intensity is at B5 bin or above. Chromaticity Coordinates (x, y) Rank A0 B3 B4 B5 B6 C0 Chromaticity x 0.280-0.264 0.287-0.283 0.307-0.304 0.296-0.287 0.311-0.307 0.330-0.330 Coordinates y 0.248-0.267 0.295-0.305 0.315-0.330 0.276-0.295 0.294-0.315 0.318-0.360 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content