OVLBB4C7

Round Blue Through-hole LED Lamp (3mm) OVLBB4C7 x x x High Brightness with Well-defined Spatial Radiation Patterns UV-resistant Epoxy Lens Blue (470nm) The OVLBB4C7 is a high-intensity InGaN LED mounted in a clear plastic T-1 package. Its UV-resistant epoxy lens makes this device an optimal solution for outdoor applications. This LED provides a well-defined and even emission pattern. Applications x Pedestrian Signals x Signage and Architectural Lighting x Backlighting x Automotive Part Number OVLBB4C7 Material InGaN Emitted Color Blue Intensity Typ. mcd 900 Lens Color W ater Clear RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0705 Page 1 Round Blue Through-hole LED (3mm) OVLBB4C7 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, 1KHz) Power Dissipation Current Linearity vs. Ambient Temperature LED Junction Temperature Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 Note: 1. Solder time less than 5 seconds at temperature extreme. -40 ~ +100° C -40 ~ +85° C 5V 20 mA 50 mA 80 mW -0.2 mA/° C 125° C 260° C Electrical Characteristics TA = 25oC unless otherwise noted SYMBOL Iv VF IR P D PARAMETER Luminous Intensity Forward Voltage Reverse Current MIN 525 ---------465 ---- TYP 900 3.4 ---466 470 45 MAX ---4.0 50 ---475 ---- UNITS CONDITIONS IF = 20mA IF = 20mA VR = 5V IF = 20mA IF = 20mA IF = 20mA mcd V µA Peak Wavelength Dominant Wavelength 50% Power Angle nm nm deg 2 ½H-H Standard Bins (IF = 20mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLBB4C7 may be filled with any or all bins contained as below. Luminous Intensity (mcd) BJ 1440 1025 735 525 465 470 Dominant Wavelength (nm) H 2.6–3.0 J 3.0–3.3 K 3.3–3.6 475 7R 7Q 7P Luminous intensity is at 7P bin or above. BM Forward VoltRank Voltage L 3.6–4.0 Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content