OVLBY4C7

Round Yellow Through-hole LED Lamp (3mm) OVLBY4C7 x x x High Brightness with Well-defined Spatial Radiation Patterns UV-resistant Epoxy Lens Yellow (589nm) Product Photo Here The OVLBY4C7 is a high-intensity AlInGaP LED mounted in a clear plastic T-1 package. Its UV-resistant epoxy lens makes this device an optimal solution for outdoor applications. This LED provides a well-defined and even emission pattern. Applications x Pedestrian Signals x Signage and Architectural Lighting x Backlighting x Automotive x Outdoor/Indoor Displays Part Number OVLBY4C7 Material AlInGaP Emitted Color Yellow Intensity Typ. mcd 2400 Lens Color W ater Clear RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0705 Page 1 Round Yellow Through-hole LED (3mm) OVLBY4C7 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, 1KHz) Power Dissipation Current Linearity vs. Ambient Temperature LED Junction Temperature Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 Note: 1. Solder time less than 5 seconds at temperature extreme. -40 ~ +100° C -40 ~ +85° C 5V 30 mA 100 mA 78 mW -0.5 mA/° C 125° C 260° C Electrical Characteristics TA = 25oC unless otherwise noted SYMBOL Iv VF IR P D PARAMETER Luminous Intensity Forward Voltage Reverse Current MIN 1440 ---------585 ---- TYP 2400 2.2 ---593 589 45 MAX ---2.6 10 ---595 ---- UNITS CONDITIONS IF = 20mA IF = 20mA VR = 5V IF = 20mA IF = 20mA IF = 20mA mcd V µA Peak Wavelength Dominant Wavelength 50% Power Angle nm nm deg 2 ½H-H Standard Bins (IF = 20mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLBY4C7 may be filled with any or all bins contained as below. Luminous Intensity (mcd) Y3 3850 2820 2010 1440 585 589 592 Dominant Wavelength (nm) G 1.8–2.0 H 2.0–2.2 7U 7T 7S 595 Luminous intensity is at 7S bin or above. Y4 Y5 Forward Voltage Rank Voltage J 2.2–2.4 6 2.4–2.6 Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content