OVLJGGD8

Oval Green LED Lamp (4mm) OVLJGGD8 x x x x x High luminous intensity Defined spatial radiation Multiple viewing angles UV-resistant epoxy Precision optical performance Product Photo Here The OVLJGGD8 is designed for superior performance in outdoor environments. Its radiation pattern matches red (OVLJRGD8) and blue (OVLJBGD8) devices in identical packages to create LED pixels for full-color video screens. Applications x Variable Message Signs x Indoor/Outdoor Advertising Signage x Traffic and Highway Signs x Full-Color Video Signs Part Number OVLJGGD8 Material InGaN Emitted Color Green Intensity Typ. mcd 1200 Lens Color Green Diffused RoHS Data is subject to change without prior notice. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 1 Oval Green LED Lamp (4mm) OVLJGGD8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, 1KHz) Power Dissipation Lead Soldering Temperature (3mm from the base of the epoxy bulb) Note: 1. Solder time less than 3 seconds at temperature extreme. 1 -40 ~ +100 ° C -40 ~ +95 ° C 5V 25 mA 100 mA 105 mW 260° C Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL Iv VF IR D PARAMETER Luminous Intensity Forward Voltage Reverse Current Dominant Wavelength 50% Power Angle MIN 770 ------520 ------- TYP 1200 3.6 ---525 100 50 MAX ---4.2 100 535 ------- UNITS CONDITIONS IF = 20mA IF = 20mA VR = 5V IF = 20mA IF = 20mA IF = 20mA mcd V µA nm deg deg 2 ½H-H 2 ½V-V Standard Bins (IF = 20mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLJGGD8 may be filled with any or all bins contained as below. Luminous Intensity (mcd) X7 2130 1520 1100 770 520 525 530 535 U T S Luminous intensity is at S bin or above. X8 X9 Dominant Wavelength (nm) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content