OVLKGGT6

Oval Green LED Lamp (3mm) OVLKGGT6 x x x x x High luminous intensity Defined spatial radiation Multiple viewing angles UV-resistant epoxy Precision optical performance The OVLKGGT6 is designed for superior performance in outdoor environments. Its radiation pattern matches blue (OVLKBGT6) and red-orange (OVLKQGT6) devices in identical packages to create LED pixels for full-color video screens. Applications x Variable Message Signs x Indoor/Outdoor Advertising Signage x Traffic and Highway Signs x Full-Color Video Signs Part Number OVLKGGT6 Material InGaN Emitted Color Green Intensity Typ. mcd 1100 Lens Color Green Diffused 1 ANODE 2 CATHODE RoHS Data is subject to change without prior notice. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 1 Oval Green LED Lamp (3mm) OVLKGGT6 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, 1KHz) Power Dissipation Lead Soldering Temperature (5 seconds max) -40 ~ +100 ° C -30 ~ +80 ° C 5V 30 mA 100 mA 120 mW 260° C Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL IV VF IR D PARAMETER Luminous Intensity Forward Voltage Reverse Current Dominant Wavelength 50% Power Angle MIN 725 ------520 ---- TYP 1100 3.3 ---525 x: 100 y: 60 MAX ---3.9 2 535 ---- UNITS mcd V µA nm deg CONDITIONS IF = 20 mA IF = 20 mA VR = 5V IF = 20 mA IF = 20 mA 2 ½ Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLKGGT6 may be filled with any or all bins contained as below. Luminous Intensity (mcd) Standard Bins (IF = 20mA) 1045 870 725 520 525 530 535 5 4 3 Luminous intensity is at 3 bin or above. Dominant Wavelength (nm) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. When soldering, leave 2.5mm minimum clearance between the resin base and the soldering point. Issue 1.0 Page 2 0505 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Oval Green LED Lamp (3mm) OVLKGGT6 Typical Electro-Optical Characteristics Curves mA % V mA Forward Current vs. Forward Voltage Relative Luminous Intensity vs. Forward Current mA % ° C nm Maximum Forward DC Current vs. Ambient Temperature Relative Luminous Intensity vs. Wavelength OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 3 Oval Green LED Lamp (3mm) OVLKGGT6 Issue Change Description Approval Date 1.0 Initial Release J. Haynie 5/26/05 Issue 1.0 Page 4 0505 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com