OVLLG8C7

Cylindrical High-Intensity Green LED (5 mm) OVLLG8C7 x x x x W ide viewing angle High-brightness indicator Industry standard lead spacing Unique lens shape for flexible applications Product Photo Here The OVLLG8C7 is designed for superior performance in signage and lighting applications that require wide-angle, uniform light output. This device combines a high-intensity InGaN LED with a unique flat-topped T-1¾ package to provide both high brightness and a wide spatial radiation pattern. Applications x Channel letter and other signage backlighting x Decorative architectural indoor and outdoor lighting accents x Industrial and consumer indicators Part Number OVLLG8C7 Material InGaN Emitted Color Green Intensity Typ. mcd 670 Lens Color Water Clear 1 ANODE 2 CATHODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 1 of 4 Cylindrical High-Intensity Green LED (5 mm) OVLLG8C7 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, 1KHz) Power Dissipation Lead Soldering Temperature (4mm from the base of the epoxy bulb)1 LED Junction Temperature Current Linearity vs. Ambient Temperature Note: 1. Solder time less than 5 seconds at temperature extreme. -40 ~ +100° C -40 ~ +85° C 5V 20 mA 50 mA 80 mW 260° C 125° C -0.2 mA/° C Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL Iv VF IR P D PARAMETER Luminous Intensity Forward Voltage Reverse Current Peak Wavelength Dominant Wavelength 50% Power Angle MIN 415 ---------------- TYP 670 3.4 ---521 525 85 MAX ---4.0 50 ---------- UNITS CONDITIONS IF = 20 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA mcd V µA nm nm deg 2 ½H-H Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLLG8C7 may be filled with any or all bins contained as below. Luminous Intensity F5 810–1135 580–810 415–580 519 523 527 F6 F7 0R 0Q 0P 531 Luminous intensity is at 0P bin or above. Standard Bins (IF = 20 mA) Forward Voltage (VF) Rank Voltage (V) H 2.6–3.0 Dominant Wavelength (nm) J 3.0–3.3 K 3.3–3.6 L 3.6–4.0 INotes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content