OVLLY8C7

Cylindrical High-Intensity Yellow LED (5 mm) OVLLY8C7 x x x x W ide viewing angle High-brightness indicator Industry standard lead spacing Unique lens shape for flexible applications Product Photo Here The OVLLY8C7 is designed for superior performance in signage and lighting applications that require wide-angle, uniform light output. This device combines a high-intensity InGaN LED with a unique flat-topped T-1¾ package to provide both high brightness and a wide spatial radiation pattern. Applications x Channel letter and other signage backlighting x Decorative architectural indoor and outdoor lighting accents x Industrial and consumer indicators Part Number OVLLY8C7 Material AllnGaP Emitted Color Yellow Intensity Typ. mcd 650 Lens Color Water Clear 1 ANODE 2 CATHODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 1 of 4 Cylindrical High-Intensity Yellow LED (5 mm) OVLLY8C7 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, 1KHz) Power Dissipation Lead Soldering Temperature (4mm from the base of the epoxy bulb)1 LED Junction Temperature Current Linearity vs. Ambient Temperature Note: 1. Solder time less than 5 seconds at temperature extreme. -40 ~ +100° C -40 ~ +85° C 5V 30 mA 100 mA 78 mW 260° C 125° C -0.5 mA/° C Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL Iv VF IR P D PARAMETER Luminous Intensity Forward Voltage Reverse Current Peak Wavelength Dominant Wavelength 50% Power Angle MIN 470 ---------------- TYP 650 2.2 ---593 589 85 MAX ---2.6 10 ---------- UNITS CONDITIONS IF = 20 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA mcd V µA nm nm deg 2 ½H-H Standard Bins (IF = 20 mA) Luminous Intensity (mcd) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLLY8C7 may be filled with any or all bins contained as below. Y3 920–1285 660–920 470–660 585 589 592 595 Y4 Y5 6R 6Q 6P Luminous intensity is at P bin or above. Forward Voltage (VF) Rank G Dominant Wavelength (nm) H J 6 2.4–2.6 Voltage 1.8–2.0 2.0–2.2 2.2–2.4 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content