OVSABBC2R8

Blue PLCC4 Surface Mount LED OVSABBC2R8 x x x x x High intensity with low power consumption White PLCC4 packaged in 8 mm tape on 7” diameter reel Compatible with automatic placement equipment Dimensions: 3.5 x 2.8 x 1.95 mm 120° viewing angle Product Photo Here The OVSABBC2R8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications x Traffic lights x Signal and symbol luminaire x Mono-color indicators x Backlighting (LCD, switches, displays, illuminated advertising) x Interior automotive lighting (instrumentation clusters) x Safety marker lights (steps, exit ways) Part Number OVSABBC2R8 Material InGaN Emitted Color Blue Intensity Typ. mcd 200 Lens Color W ater Clear Recommended Soldering Pad RoHS Moisture DIMENSIONS ARE IN: [MILLIMETERS] INCHES DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.1 08/06 Page 1 of 4 Blue PLCC4 Surface Mount LED OVSABBC2R8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Junction Temperature Junction/Ambient 1 -40 ~ +100° C -40 ~ +100° C 110° C 350° C/W 200° C/W 5V 30 mA 100 mA 140 mW Junction/Solder Point Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, PW ”  — VHF Power Dissipation Note: 1. Rth test condition: Mounted on PC board FR 4 (pad size Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL IV VF IR D PARAMETER Luminous Intensity Forward Voltage Reverse Current Dominant Wavelength 50% Power Angle MIN 140 ------460 ---- 2 ½ Standard Bins (IF = 30 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVSABBC2R8 may be filled with any or all bins contained as below. X3 X4 X5 X6 Luminous Intensity (mcd) 355 280 224 180 140 460 465 470 475 480 T1 S2 S1 R2 Luminous intensity is at R2 bin or above. Dominant Wavelength (nm) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 08/06 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com ¥¦¥¦¤¡¢  £ 2 ) TYP 200 3.9 ---470 120 MAX ---4.6 10 480 ---- UNITS mcd V µA nm deg CONDITIONS IF = 30 mA IF = 30 mA VR = 5 V IF =30 mA IF =30 mA Blue PLCC4 Surface Mount LED OVSABBC2R8 Typical Electro-Optical Characteristics Curves mA % 3.2 3.6 4.0 Forward Current vs Forward Voltage V 4.4 4.8 5.2 Relative Luminous Intensity vs Forward Current mA Half Power W L = 28 nm Rth j-s=200° C/W mA Rth j-a=350° C/W nm Relative Luminous Intensity vs Wavelength Maximum Forward DC Current vs Ambient Temperature ° C 50% Power Angle: 120° v A Spatial Distribution Reverse Current vs Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.1 08/06 Page 3 of 4 Blue PLCC4 Surface Mount LED OVSABBC2R8 Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 2000 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 08/06 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com