OVSAWBCR4

White PLCC4 Surface Mount LED (120° Viewing Angle) OVSAWBCR4 • • • • High luminous intensity High efficiency Emission color: White Wide variety of application possibilities Product Photo Here The OVSAWBCR4 provides high intensity light from a surface mount package. Light output is optimized by an interior reflector and the wide viewing angle adds flexibility for applications ranging from hand-held appliances to automotive interiors. Applications • Backlighting of full color LCD • Automotive interior lighting • General lighting • Coupling into light guides • Entertainment equipment Part Number OVSAWBCR4 Material InGaN Emitted Color White Intensity Typ. 1050 mcd Lens Color W ater Clear [1.5] .06 [0.4] .02 [2.6] .10 [1.5] .06 2 RECOMMENDED SOLDER PAD DESIGN RoHS Moisture DIMENSIONS ARE IN: [MILLIMETERS] INCHES DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 10/06 Page 1 of 6 White PLCC4 Surface Mount LED OVSAWBCR4 Absolute Maximum Ratings Storage Temperature Range Operating Temperature Range Soldering Temperature (5 second maximum) Forward Current Peak Forward Current (10% Duty Cycle, 1 KHz) Reverse Voltage ESD Threshold (HBM) LED Junction Temperature Power Dissipation TA = 25o C (on metal core PCB) unless otherwise noted -40 ~ + 100° C -40 ~ + 100° C 260° C 30mA 200 mA 5V 2000 V 125° C 135 mW Electrical Characteristics SYMBOL IV VF IR 2 Θ½ x y TA = 25o C (on metal core PCB) unless otherwise noted PARAMETER Luminous Intensity Forward Voltage Reverse Current 50% Power Angle Chromaticity Coordinates MIN 715 3.05 ------------TYP 1050 3.4 ---120 0.32 0.33 MAX 1400 4.0 10 ---------UNITS mcd V µA deg ------CONDITIONS IF = 30 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA Standard Bins (IF = 30 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown. Orders for OVSAWBCR4 may be filled with any or all bins contained as below. Luminous Intensity (mcd) 1400 W1 1125 V2 900 V1 715 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content