OVSAWBCR9

White PLCC4 Surface Mount LED (120° Viewing Angle) OVSAWBCR9 x x x x High luminous intensity High efficiency, 3-chip device Emission color: x = 0.29, y = 0.30 Pb-free Product Photo Here The OVSAWBCR9 combines three die in a single package to provide high intensity light from a surface mount package. Light output is optimized by an interior reflector and the wide viewing angle adds flexibility for applications ranging from hand-held appliances to automotive interiors. Applications x Backlighting of full color LCD x Automotive interior lighting x General lighting x Coupling into light guides x Entertainment equipment Part Number OVSAWBCR9 Material InGaN Emitted Color White Intensity Typ. 1900 mcd Lens Color W ater Clear 1,3,4 CATHODE 2 ANODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 11/05 Page 1 of 5 White PLCC4 Surface Mount LED OVSAWBCR9 Absolute Maximum Ratings Storage Temperature Range Operating Temperature Range Soldering Temperature (5 second maximum) Forward Current 1 TA = 25o C (on metal core PCB1) unless otherwise noted -40 ~ + 85° C -40 ~ + 100° C 260° C 25 mA 100 mA 5V 150 V 110 mW Peak Forward Current (10% Duty Cycle, 1 KHz)1 Reverse Voltage Electrostatic Discharge Power Dissipation Note: 1. Maximum forward current for each die. Electrical Characteristics SYMBOL IV VF IR 2 x y ½ TA = 25o C (on metal core PCB1) unless otherwise noted PARAMETER Luminous Intensity Forward Voltage Reverse Current 2 2 1 MIN 1045 ---------------- TYP 1900 3.5 ---120 0.29 0.30 MAX ---4.0 50 ---------- UNITS mcd V µA deg ------- CONDITIONS IF = 20 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA 50% Power Angle Chromaticity Coordinates3 Notes: 1. When three LED die are operated simultaneously. 2. For each die. 3. The C.I.E. 1931 chromaticity diagram. Standard Bins (IF = 20mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown. Orders for OVSAWBCR9 may be filled with any or all bins contained as below. Rank Chromaticity Coordinates Rank Chromaticity Coordinates x y x y A0 0.280 0.264 0.283 0.296 0.248 0.267 0.305 0.276 B1 0.287 0.283 0.330 0.330 0.295 0.305 0.360 0.339 B2 C0 0.296 0.287 0.330 0.330 0.330 0.330 0.361 0.356 0.276 0.295 0.339 0.318 0.318 0.360 0.385 0.351 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content