OVTL09LGAX

10-Watt Lednium SMD Series (120° Viewing Angle) OVTL09LGAX x x x x x x Revolutionary 3-dimensional packaged LED source Robust energy-efficient design with long operating life Low thermal resistance Exceptional spatial uniformity Optional optics to suit application Available in amber, blue, green, red, white and multi-colored Product Photo Here The OVTL09LGAX surface mount series provides a 10-Watt energy-efficient 3-dimensional packaged LED source that offers high luminance (up to 330 lumens), low thermal resistance and a long operating lifespan. The device offers a 120° viewing angle and is available in amber, blue, green, red, white and multi-colored. Optional optics are offered to suit application. Please contact Optek for additional information. Applications x Automotive exterior and interior lighting x Architectural lighting x Electronic signs and signals Part Number OVTL09LGAA OVTL09LGAB OVTL09LGAG OVTL09LGAR OVTL09LGAW OVTL09LGAM Viewing Angle 120° 120° 120° 120° 120° 120° Emitted Color Amber Blue Green Red White Red/Green/Blue Typical Luminous Flux (lm) 330 60 290 247 250 221 Typical On-Axis Intensity (cd) 67 19 100 75 70 68 Lens Color Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.2 01/06 Page 1 of 5 10-Watt Lednium Surface Mount Series OVTL09LGAX Absolute Maximum Ratings DC Forward Current Peak Pulsed Forward Current Reverse Voltage Maximum Allowable Junction Temperature2 Storage and Operating Temperature Notes: 1. Pulse width 1 ms maximum, duty cycle 1/16. 2. Thermal resistance junction to board (TJB) is 5° C/W. 1 1.05 A 3A 15 V 130° C -50° ~ +80 ° C Electrical Characteristics (IF = 600 mA, TJ = 25° C) SYMBOL PARAMETER Forward Voltage (Amber) Forward Voltage (Blue) Forward Voltage (Green) Forward Voltage (Red) Forward Voltage (Red/Green/Blue) Forward Voltage (White) MIN 6.3 8.9 9.75 6.0 8.4 8.9 ------------- TYP 6.4 9.1 9.9 6.1 8.6 9.1 -6.0 -4.8 -5.0 120 MAX 6.5 9.25 10.1 6.2 8.8 9.25 ------------- UNITS V V V V V V mV/° C mV/° C mV/° C deg VF VF Temperature Co-efficient (Amber, Red) VF Temperature Co-efficient (White, Blue) VF Temperature Co-efficient (Green) 2 ½ 50% Power Angle Optical Characteristics (IF = 1.05 A, TJ = 25° C, 2 COLOR Amber Blue Green Red White DOMINANT WAVELENGTH MIN 594 466 523 623 N/A TYP 595 467 524 624 N/A MAX 596 468 526 625 N/A ½ = 120° ) DOMINANT WAVELENGTH TEMPERATURE DEPENDENCE 0.08 nm/° C 0.05 nm/° C 0.04 nm/° C 0.05 nm/° C N/A SPECTRAL FULL-WIDTHHALF-MAXIMUM 16 nm 24 nm 40 nm 18 nm N/A OPTEK’s Lednium Series Solid State Lighting products package the highest quality LED chips. Typically, the lumen output of these chips can be as high as 70% after 50,000 hours of operation. This prediction is based on specific test results and on tests on similar materials, and relies on strict observation of the design limits and ratings included in this data sheet. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 01/06 Page 2 of 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Phone: (972) 323-2200 or (800) 341-4747 10-Watt Lednium Surface Mount Series OVTL09LGAX CIE Chromaticity Diagram Y X Spatial Intensity Distribution 1.0 0.8 Normalized Intensity 0.6 0.4 0.2 0.0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angle (degrees) Normalized Spectral Intensity vs Angular Displacement OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.2 01/06 Page 3 of 5 10-Watt Lednium Surface Mount Series OVTL09LGAX Typical Electro-Optical Characteristics Curves Input Current = 1.05 A, TJ = 25° C Input Current = 1.05 A, TJ = 25° C Normalized Spectral Intensity 1.0 Normalized Spectral Intensity 1.0 5000 ° K 0.8 0.6 0.4 0.2 0.0 380 0.8 0.6 0.4 0.2 0.0 380 430 480 530 580 630 680 730 780 430 480 530 580 630 680 730 780 W avelength (nm) W avelength (nm) W avelength Characteristics Luminosity normalized to TJ = 25° C W avelength Characteristics 2.0 Normalized Luminosity Forward Voltage (V) 10 9 8 7 6 5 1.6 1.2 1.0 0.4 0.0 -20 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 Junction Temperature ° C Forward Current (% of rating) Junction Temperature Characteristics Derating of continuous forward current must be observed to prevent maximum junction temperature from being exceeded. Forward Current Characteristics Derating of continuous forward current must be observed to prevent maximum junction temperature from being exceeded. 120 100 80 60 40 20 0 20 40 60 80 100 120 140 120 100 80 60 40 20 0 20 40 60 80 100 120 140 Maximum Current (%) Ambient Temperature ° C Maximum Current (%) Ambient Temperature ° C Derating Curves - Blue, Green and White LEDs Derating Curves - Amber and Red LEDs OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 01/06 Page 4 of 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Phone: (972) 323-2200 or (800) 341-4747 10-Watt Lednium Surface Mount Series OVTL09LGAX OPTEK Lednium Turtle Markings Packaging: 25 pieces per tray OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.2 01/06 Page 5 of 5