OSP-201-1550-7030-FC-IC

CWDM 1 Channel Add/Drop Card OSP-201 Optical Splitter The OSP-201 enables the splitting of an optical signal onto two separate optical fibers at power ratios of 50/50, 70/30 and 90/10. System Design With the OSP-201, you are able to input a fiber strand at a specified wavelength and output two fibers, each at the same designated wavelength. Power loss is specified by the relevant ratio of the OSP-201 version (see below). The OSP-201 is perfect for applications where common fiber count is limited and signals are distributed to different locations dropped from a common path. Features • Varying Power Ratios for Network-Specific Configuration • Optical Multicasting • Drop the optical signal via a second fiber to each location • Enhanced Optical Network Configuration • Minimization of Optical Fiber • Compatible with OptivaView™ SNMP Management Suite ™ Optiv a Optiva™ Configurable Communication Platform Network Management SDI & HD-SDI OSP-201 Optical Splitter Composite Video, Audio & Data RGB/VGA/DVI Port A Audio/FSK/Intercom Data (Ethernet/Serial/USB) Port B CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames VAD Transmission Common Port Power Supplies & Accessories General Specifications Insertion Loss Dimensions & Weight Operating Temperature Storage Temperature Relative Humidity Versions Available Model Number* Wavelength (+/- 40nm) Splitting Ratio & Fiber Type 1310nm 1310nm 1310nm 1550nm 1550nm 1550nm Singlemode Singlemode Singlemode Singlemode Singlemode Singlemode 50:50 70:30 90:10 50:50 70:30 90:10 Maximum Insertion Loss (dB) Port Port Port Port Port Port A: A: A: A: A: A: 3.9; 2.1; 0.8; 3.9; 2.1; 0.8; Port Port Port Port Port Port B B B B B B 3.9 6.4 12.7 3.9 6.4 12.7 MADE IN THE USA See versions below Insert card (IC): 6.3” L x 0.8” W x 4.0” H; 10 oz -5° C to +70° C -40° C to +85° C 0-95%, Non-condensing OSP-201-1310-5050-XX-IC OSP-201-1310-7030-XX-IC OSP-201-1310-9010-XX-IC OSP-201-1550-5050-XX-IC OSP-201-1550-7030-XX-IC OSP-201-1550-9010-XX-IC *ST, FC, SC, and LC optical connectors are available. Please specify your preference (instead of "XX" in the model number), when ordering. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice