OTS-1ETR

Optiva Standard, 1 Duplex 10/100 Mbps Ethernet ™ OTS-1ETR Ethernet Transmission The OTS-1ETR provides auto-sensing digital transmission of 1 Channel of 10/100 Ethernet. Ethernet In Ethernet Out Video System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ Upgrade Path ST, LC, SC or FC ™ Optiv a ™ Optiv a Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Audio ST, LC, SC or FC Data VAD Transmission VAD Transmission OTS-1ETR OTS-1ERT Ethernet Features • Uncompressed 10/100 Ethernet over one fiber • TDM - Single fiber, dual wavelength • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). The Optiva™ bandwidth requirement of this system is 172 Mbps. Versions Available* Wavelength (nm) & Fiber 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) Non-Optical Version Transmit/Receive** OTS-1ETR-A2/A3M-XX-IC OTS-1ETR-A2/A3-XX-IC OTS-1ETR-A2/A3D-XX-IC OTS-1ETR-A2/A3H-XX-IC OTS-1ETR-L4/L4-XX-IC OTS-1ETR-NOC-IC Receive/Transmit** OTS-1ERT-A3M/A2-XX-IC OTS-1ERT-A3/A2-XX-IC OTS-1ERT-A3D/A2-XX-IC OTS-1ERT-A3H/A2-XX-IC OTS-1ERT-L4/L4-XX-IC OTS-1ERT-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 12 17 25 Varies N/A Range*** (km) Form Factor 3 20 40 60 20-70 N/A IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Data (Ethernet/Serial/USB) Data Standard Data Rate Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Optiva™ Configurable Ethernet IEEE 802.3 (Auto-Negotiation) 10/100 Mbps RJ-45 Communication Platform Network Management SDI & HD-SDI 11 oz Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA Sample Configuration