OTS-1SDR2DAR-A2D-FC-IC

Optiva Standard, 1 SDI 270 Mbps and 2 Stereo AES/EBU Digital Audio ™ OTS-1SD2DA SDI Video and Digital Audio Transmission The OTS-1SD2DA provides for the digital transmission of 1 Channel of uncompressed SDI Video and 2 Channels of AES/EBU Audio, at absolute broadcast quality. Video System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ Upgrade Path S T A T U S A L E R T 2 AES/EBU In S T A T U S A L E R T 2 AES/EBU Out Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Audio SDI Video In ST, LC, SC or FC SDI Video Out ST, LC, SC or FC ™ Optiv a ™ Optiv a Data VAD Transmission VAD Transmission OTS-1SD2DAT OTS-1SD2DAR Features • Uncompressed SDI Video and 2 AES/EBU channels over one fiber • TDM - Single Wavelength • Complies with SMPTE standards for Video and Audio transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Broadcast/Studio and Professional AV applications This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). The Optiva™ bandwidth requirement of this system is 361 Mbps. Versions Available* Wavelength (nm) & Fiber 1310 Multimode 1310 Singlemode 1310 Singlemode (D) 1550 Singlemode 1550 Singlemode (D) 1270-1610 SM (CWDM) Non-Optical Version Transmit** OTS-1SDT2DAT-A1-XX-IC OTS-1SDT2DAT-A2-XX-IC OTS-1SDT2DAT-A2D-XX-IC OTS-1SDT2DAT-A3-XX-IC OTS-1SDT2DAT-A3D-XX-IC OTS-1SDT2DAT-L4-XX-IC OTS-1SDT2DAT-NOC-IC Receive** Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 7 12 17 25 Varies N/A Range*** (km) 3 10 20 40 60 20-70 N/A Form Factor IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) OTS-1SDR2DAR-A1-XX-IC OTS-1SDR2DAR-A2-XX-IC OTS-1SDR2DAR-A2D-XX-IC OTS-1SDR2DAR-A3-XX-IC OTS-1SDR2DAR-A3D-XX-IC OTS-1SDR2DAR-L4-XX-IC OTS-1SDR2DAR-NOC-IC * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice SDI & HD-SDI Video Standard Pathological Test Code Bit Rate Bit error rate Connector Audio Digital Format SMPTE 259 RP-178 270 Mbps 10-14 BNC (IEC 60169-8) Optiva™ Configurable Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data Connector AES/EBU AES3-1992 (ANSI S4,40) SMPTE 276M Micro DB25 RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms LED Status Indication Compatible with OptivaView™ SNMP Management Suite 11 oz Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA Sample Configuration