OTS-1SDT2DAT1DTR-NOC-IC

Optiva Standard, 1 SDI 270 Mbps, ™ OTS-1SD2DA1DTR 2 Stereo AES/EBU Digital Audio and 1 Duplex RS-232/422/485 Data SDI Video, Audio and Serial Data Transmission The OTS-1SD2DA1DTR provides for the digital transmission of 1 Channel of uncompressed SDI Video, 2 Channels of AES/EBU Audio and 1 Channel of duplex Serial Data, at absolute broadcast quality. System Design S T A T U S A L E R T Video 2 AES/EBU In 1 Serial Data In/Out S T A T U S A L E R T 2 AES/EBU In 1 Serial Data Out/In Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Audio All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). The Optiva™ bandwidth requirement of this system is 346 Mbps. SDI Video In ST, LC, SC or FC SDI Video Out ST, LC, SC or FC ™ Optiv a ™ Optiv a Data VAD Transmission VAD Transmission OTS-1SDT2DAT1DTR OTS-1SDR2DAR1DRT Features • Uncompressed SDI Video over one fiber • TDM - Single Wavelength • Complies with SMPTE 259 for uncompressed SDI • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Broadcast/Studio and Professional AV applications Versions Available* Wavelength (nm) & Fiber 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) Non-Optical Version Transmit/Receive** OTS-1SDT2DAT1DTR-A2/A3M-XX-IC OTS-1SDT2DAT1DTR-A2/A3-XX-IC OTS-1SDT2DAT1DTR-A2/A3D-XX-IC OTS-1SDT2DAT1DTR-A2/A3H-XX-IC OTS-1SDT2DAT1DTR-L4/L4-XX-IC OTS-1SDT2DAT1DTR-NOC-IC Receive/Transmit** OTS-1SDR2DAR1DRT-A3M/A2-XX-IC OTS-1SDR2DAR1DRT-A3/A2-XX-IC OTS-1SDR2DAR1DRT-A3D/A2-XX-IC OTS-1SDR2DAR1DRT-A3H/A2-XX-IC OTS-1SDR2DAR1DRT-L4/L4-XX-IC OTS-1SDR2DAR1DRT-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 12 17 25 Varies N/A Range*** (km) Form Factor 3 20 40 60 20-70 N/A IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice SDI & HD-SDI Video Standard Pathological test code Bit rate Bit error rate Connector Audio Digital Format SMPTE 259 RP-178 270 Mbps 10-14 BNC (IEC 60169-8) Optiva™ Configurable Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Connector AES/EBU AES3-1992 (ANSI S4,40) SMPTE 276M Micro DB25 Data Connector RS-232, RS-422 Data Rate RS-485 (2 Wire) Data Rate RS-485 (4 Wire) Data Rate General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Micro DB25 DC to 1 Mbps DC to 1 Mbps DC to 1 Mbps CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames 11 oz Power Supplies & Accessories Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms (Audio