OTS-2V4ATR1ETR

OTS-2V4ATR1ETR Optiva Standard, ® 1 Composite Video, 4 Duplex Audio and 1 Duplex 10/100 Mbps Ethernet Composite Video, Audio and Ethernet Transmission The OTS-2V4ATR1ETR provides for the digital transmission of 2 Channels of Composite Video, 4 Channels of Duplex Analog Audio and 1 Channel of Duplex 10/100 Ethernet. System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva Desktop Card Racks (OT-DTCR Series). The Optiva® Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva® Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva® system daisy-chain. (See “Non-Optical Version” below). The Optiva® bandwidth requirement of this system is 894 Mbps. Ethernet In/Out Composite Video In Ethernet Out/In Composite Video Out Video Analog Audio In/Out S T A T U S A L E R T S T A T U S A L E R T Analog Audio Out/In S T A T U S A L E R T S T A T U S A L E R T Audio Composite Video In ST, LC, SC or FC Analog Audio In/Out Composite Video Out ST, LC, SC or FC Analog Audio Out/In Optiva™ VAD Transmission Optiva™ VAD Transmission Optiva™ VAD Transmission Optiva™ VAD Transmission Data OTS-2VT4ATR1ETR OTS-2VR4ART1ERT Ethernet Features • Composite Video, Audio and Ethernet over one fiber • 12-Bit Digital Transmission (Video) • TDM - Single fiber, dual wavelength • Complies with SMPTE Standards • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Professional AV applications Versions Available* Wavelength (nm) & Fiber 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) Non-Optical Version Transmit/Receive** OTS-2VT4ATR1ETR-A2/A3M-XX-IC OTS-2VT4ATR1ETR-A2/A3-XX-IC OTS-2VT4ATR1ETR-A2/A3D-XX-IC OTS-2VT4ATR1ETR-A2/A3H-XX-IC OTS-2VT4ATR1ETR-L4/L4-XX-IC OTS-2VT4ATR1ETR-NOC-IC Receive/Transmit** OTS-2VR4ART1ERT-A3M/A2-XX-IC OTS-2VR4ART1ERT-A3/A2-XX-IC OTS-2VR4ART1ERT-A3D/A2-XX-IC OTS-2VR4ART1ERT-A3H/A2-XX-IC OTS-2VR4ART1ERT-L4/L4-XX-IC OTS-2VR4ATR1ETR-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 12 17 25 Varies N/A Range*** (km) Form Factor 3 20 40 60 20-70 N/A IC (2-slots) IC (2-slots) IC (2-slots) IC (2-slots) IC (2-slots) IC (2-slots) Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm; "ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z. * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm forfor custom requirements. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm custom requirements. Opticomm Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Passband Ripple Chroma/Luma Delay Compatibility Signal to Noise Ratio Connector Analog Audio Level Bandwidth Signal to Noise Ratio Total Harmonic Distortion Signal Coding Connector SMPTE 170M; RS-250C (Short Haul) 12-Bit Digital Transmission 1.0 Volt p-p 5.5 MHz < 2% < 0.7° < ±0.2 dB to 5.5 MHz 67 dB BNC (IEC 60169-8) Impedance Options: Input Balanced 600 Ohm Balanced Hi-Z Unbalanced Hi-Z Optiva™ Multi-Signal Optiva™ Configurable Transmission Platform Communication Platform Network Management Network Management SDI and HD-SDI SDI & HD-SDI Composite Video, Composite Video, Audio & Data Audio & Data Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Data (Ethernet/Serial/USB) 6 dBm In/Out 20 Hz to 20 KHz > 80 dB < 0.1% 24-bit Micro DB25 Output Balanced 600 Ohm Balanced Low-Z Unbalanced Low-Z CATV/RF & L-Band CATV/RF & L-Band Optical Switching, Routing Optical Switching, Routing & Redundancy & Redundancy Passive Multiplexing Passive Multiplexing Solutions Solutions Enclosures, Racks Enclosures, Racks & Frames & Frames Data Standard Data Rate Connector General Dimensions & Weight Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Ethernet IEEE 802.3 10/100 Mbps RJ-45 UTP Power Supplies Power Supplies and Accessories & Accessories Insert Card (IC): 6.3” L x 0.8” W x 4.0” H Operating temperature -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC < 7w per insert card Less than 1ms (Audio