OTS-32DTR

OTS-32DTR Optiva Standard, 32 Duplex RS-232/422/485 Data ™ Serial Data Transmission The OTS-32DTR provides for the digital transmission of 32 Channels of Duplex Serial Data. ST, LC, SC or FC ST, LC, SC or FC Video System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below.) The Optiva™ bandwidth requirement of this system is 288 Mbps. Serial Data In/Out S T A T U S A L E R T S T A T U S A L E R T Serial Data In/Out S T A T U S A L E R T S T A T U S A L E R T S T A T U S A L E R T S T A T U S A L E R T Audio Serial Data In/Out Serial Data In/Out ™ Optiv a ™ Optiv a ™ Optiv a ™ Optiv a Optiv a™ VAD Transmission Optiv a™ VAD Transmission VAD Transmission VAD Transmission VAD Transmission VAD Transmission Data OTS-32DTR (RS-232) OTS-32DTR (RS-422, RS-485) Features • Uncompressed Serial Data over one fiber • TDM - Single fiber, dual wavelength • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount Versions Available* Wavelength (nm) & Fiber 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) Non-Optical Version Transmit/Receive** OTS-32DTR-A2/A3M-XX-IC OTS-32DTR-A2/A3-XX-IC OTS-32DTR-A2/A3D-XX-IC OTS-32DTR-A2/A3H-XX-IC OTS-32DTR-L4/L4-XX-IC OTS-32DTR-NOC-IC Receive/Transmit** OTS-32DRT-A3M/A2-XX-IC OTS-32DRT-A3/A2-XX-IC OTS-32DRT-A3D/A2-XX-IC OTS-32DRT-A3H/A2-XX-IC OTS-32DRT-L4/L4-XX-IC OTS-32DRT-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 12 17 25 Varies N/A Range*** (km) Form Factor 3 20 40 60 20-70 N/A IC(2 or 4-slots) IC(2 or 4-slots) IC(2 or 4-slots) IC(2 or 4-slots) IC(2 or 4-slots) IC(2 or 4-slots) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Data (Ethernet/Serial/USB) Data Connector RS-232, RS-422 Data Rate RS-485 (2 Wire) Data Rate RS-485 (4 Wire) Data Rate Contact Closure Data Rate General Dimensions & Weight Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Optiva™ Configurable Micro DB25 DC to 1 Mbps DC to 1 Mbps DC to 1 Mbps DC to 1 Mbps Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Insert Card (IC): 6.3” L x 0.8” W x 4.0” H Operating temperature -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms LED Status Indication Compatible with OptivaView™ SNMP Management Suite 11 oz CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA Sample Configuration