OTS-8LV1ETR2DJTR

Optiva Standard, 8 Composite Video, 10/100 Ethernet and 2 RS-422 Serial Data Channels ® OTS-8LV1ETR2DJTR Composite Video, Ethernet and Serial Data The OTS-8LV1ETR2DJTR provides for the digital transmission of 8 channels of Composite Video, 1 channel of Ethernet and 2 channels of RS-422 Serial Data. Video System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva® Desktop Card Racks (OT-DTCR Series). The Optiva® Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. Upgrade Path The system has an optional upgrade path to increase the amount of video channels from 8 to 16. Please contact your sales rep for details. Optical Specifications CWDM Tx Optical Output Power Tx CWDM Wavelengths Rx Optical Overload Rx Optical Sensitivity Audio Data OTS-8LVT1ETR2DJTR OTS-8LVR1ERT2DJRT Ethernet Features • 10-bit digital processing • 10/100 auto-sensing Ethernet • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Security Camera or CCTV Applications • Dual fiber, CWDM wavelength >+2 dBm 1270-1610 nm -8 dBm -30 dBm Models Available* OTS-8LVT1ETR2DJTR-L4XX/L4XX-LC-IC OTS-8LVR1ERT2DJRT-L4XX/L4XX-LC-IC * Substitution of CWDM optical wavelengths requird to complet model numbers. CWDM Wavelength Codes 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Bit Resolution Level Impedance Bandwidth Differential Gain Differential Phase DC Offset Compatibility Signal to Noise Ratio Connector Ethernet Standard Data Rate Connector Data RS-232 RS-422 RS-485 (2 wire) RS-485 (4 wire) General Dimensions & Weight Operating Temperature Storage Temperature Humidity Operating Voltage Consumption System Latency Local Monitoring Remote Monitoring 10-bit digital architecture 1.0 Volt p-p 75 Ohm - 3 dB @ 7 MHz < 2% < 0.7° 65 dB BNC (IEC 60169-8) Optiva™ Multi-Signal Optiva™ Configurable Transmission Platform Communication Platform Network Management Network Management SDI and HD-SDI SDI & HD-SDI Composite Video, Composite Video, Audio & Data Audio & Data Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Data (Ethernet/Serial/USB) IEEE 802.3 (auto-sensing) 10/100 Mbps RJ-45 CATV/RF & L-Band CATV/RF & L-Band Optical Switching, Routing Optical Switching, Routing & Redundancy & Redundancy Passive Multiplexing Passive Multiplexing Solutions Solutions Enclosures, Racks Enclosures, Racks & Frames & Frames Power Supplies Power Supplies and Accessories & Accessories 11 oz Up to 200 Kbps Up to 1 Mbit Up to 1 Mbit Up to 1 Mbit Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC < 7w per insert card Less than 1ms LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA