RGB-3004

4-Fiber VGA 200 MHz Hi-Resolution RGB-3004 200 MHz VGA/RGB Video with Audio System For Ultra High Resolution Remote Displays The RGB-3004 is a four-fiber Amplitude Modulated (AM), LED- or Laser-based VGA-RGB/Video with Digital Audio Unbalanced and Balanced Phoenix 5 Pin for RCA(L/R) stereo jack. A 15 Pin VGA interface port provides H/V Sync or Composite External Sync or Sync on Green or all three channels. It is ideal for the extension of any high resolution Video signal such as a CAD/CAM graphics workstation. Units come with a built-in Automatic Gain Control (AGC) to maintain constant Video output for each color. System Design Status indicators for: Power On, VGA H/V Sync present. All units come as a Stand Alone version. Units can be rack-mountable with optionally provided brackets for a flat surface such as a desk top in a cabinet, or mounted in a 19” Rack. RGB-3003 unit comes with internal 87264 VAC power supply that operates with a selectable power supply. The regulated switching power supply has short circuit protection, and an input operating voltage of 110/220 VAC. Features • Ultra-high resolution (1840 x 1634) • Multimode operation over 4 fibers • 200 MHz video bandwidth • VGA/SVGA with Audio • True DC restoration with AGC • Flat frequency response • Complies with RS-170, RS-170A & RS-343 EIA standards • No EMI or RFI and no ground loops • Stand Alone or Mounting Brackets • Ideal for CAD/CAM workstation extensions 865 1310 1550 Type LED Mode MM Wavelength Suffix L0 Fiber Type 50 /125µ 62.5/125µ Output Power -13 dBm -10 dBm -8 dBm Receiver Sensitivity -20 dBm -20 dBm -16 dBm Optical Loss Budget 7 dB 10 dB 8 dB Range* 1 km 2 km 8 km Conn Type ST ST FC • • • Laser SM L2 09/125µ * Chromatic dispersion and additional losses should be taken into account 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice RGB/VGA/DVI Video Video in/out impedance Video in/out level Video bandwidth Grayscale linearity distortion Pixel intensity distortion Linearity Tilt Maximum horizontal frequency Maximum refresh rate Signal to noise ratio Connector type Audio Audio in/out impedance Audio in/out level Frequency response Signal to noise ratio Total harmonic distortion Connector type General Dimensions & Weight Material Operating temperature Storage temperature Humidity Operating voltage Vibration Shock Optiva™ Configurable 75 Ω 1 volt peak to peak, 0.7 volts without sync 10 Hz to 200 MHz @ -3dB < 2.0 % typical < 2.0° typical ± 1.1 % typical ≤ 0.5 % typical 128 KHz 120 KHz >55 dB using RS-250C standards @ 1 km BNC 600 Ω balanced or unbalanced -6 to +6 dBm 10 Hz to 20 KHz > 60 dB < 1.0 %, 1 KHz at maximum modulation Phoenix 5 Pin Unbalanced 1 (L/R) to RCA Phoenix 5 Pin Balanced to 2 Mono (L/R) to XLR Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories 13.75” L x 8.50” W x 1.65” H Aluminum casing -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 110/220 VAC Up to 5 g's Up to 12 g's 39 oz Diagnostics Status monitoring LED indication MADE IN THE USA Sample Configuration