RGB-9130

175 MHz Hi-Resolution RGB/Video RGB-9130 Three-Fiber 175 MHz RGB System For Ultra High Resolution Remote Displays The RGB-9130 is a Amplitude Modulated (AM), LED- or Laser-based RGB Video transmission system, with Sync accepted on all on three channels. It is ideal for the extension of any high resolution Video signal such as a CAD / CAM graphics workstation. Units come with a built-in Automatic Gain Control (AGC) to maintain constant Video output for each color, and a status indicator for Power On. System Design All units come in a small module or Insert Card version. The cards can be inserted into our 18 slot, 19" rackmountable card cage (CC-18), or one of our smaller Desk Top Card Racks (DTCR series). The Desk Top Card Racks can handle one, two, four, or seven cards, allowing for greater flexibility and future expansion. They can sit on a flat surface as a larger Stand Alone unit, or can be surface mounted with the flanges provided. Each one of our card housings operates with an appropriate power supply. The regulated switching power supply has short circuit protection, and an input operating voltage of 85265 VAC. Features • Ultra-high resolution (1792 x 1536) • Multimode operation over three fibers • 175 MHz video bandwidth • Ideal for radar applications • True DC restoration • Flat frequency Response • Complies with RS-170, RS-170A & 343 EIA standards • No EMI or RFI and no ground loops • Stand Alone or Rack Mount • Ideal for CAD/CAM workstation extensions 865 1310 1550 Type LED Mode MM Wavelength Suffix L1 Fiber Type 50 /125µ 62.5/125µ Output Power -13 dBm -10 dBm -8 dBm Receiver Sensitivity -20 dBm -20 dBm -20 dBm Optical Loss Budget 7 dB 10 dB 12 dB Range* 1 km 2 km 5 km Conn Type ST ST FC/UPC • • • Laser SM L2 09/125µ * Chromatic dispersion and additional losses should be taken into account 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. RGB/VGA/DVI Hi-Res Video Transmission Video Video in/out impedance Video in/out level Video bandwidth Grayscale linearity distortion Pixel intensity distortion Linearity Tilt Maximun horizontal frequency Maximum refresh rate Signal to noise ratio Connector type General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Vibration Shock 75 Ω 1 volt peak to peak, 0.7 volts without sync 10 Hz to 175 MHz @ -3dB < 2.0 % typical < 2.0° typical ± 1.1 % typical ≤ 0.5 % typical 128 KHz 120 KHz >52 dB using RS-250C standards @ 1 km BNC Stand Alone (SA): 7.16” L x 5.21” W x 0.94” H 30 oz Insert card (IC): 6.3” L x 0.8” W x 4.0” H 16 oz -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 12 VDC (200 mA) or 24 VAC (300mA) or 110/220 VAC Up to 5 g's Up to 12 g's Diagnostics Status monitoring LED indicator Sample Configuration Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA