ODA-6WB-500M

From Deep UV to Mid-IR An ITW Company Blue/Green Enhanced 6 mm2 Photodiode-Preamplifier ODA-6WB-500M FEATURES • Large Active Area • • • • Low Noise High Sensitivity Custom Gains Available Hermetically Sealed TO-39 • Blue Enhanced Detector Electro-Optical Characteristics at 23°C Parameters Test Conditions Active Area 3.30 mm x 1.78 mm 5.87 Dark Offset Vs = ±5 V 1 ±2 mV Vs = ±5 BW = 0.1 to 135 kHz 283 500 µV rms Dark Offset Noise Min Typ Max Units mm2 Vs = ±5 V λ = 450 nm 85 100 V/µW Vs = ±5 V 100 130 Hz 4 fW/√Hz Transimpedance Gain 500 MΩ Supply Current 850 Sensitivity Frequency Response (–3 db) NEP λ = 450 nm 950 µA Absolute Ratings Parameters Voltage Supply Range +V to –V* Power Dissipation Storage and Operating Temperature Soldering Temperature (1/16" from case for 3 seconds max) Units 5 to 15 V 15 mW –25 to +100°C +260°C *Voltage supply across the device requires a minimum of 5 V to a maximum of 15 V from +V to –V. Revision October 20, 2021 Page 1 of 2 From Deep UV to Mid-IR An ITW Company Blue/Green Enhanced 6 mm2 Photodiode-Preamplifier ODA-6WB-500M Typical Spectral Response RESPONSIVITY (V/mW) 350 300 250 200 150 100 50 0 200 300 400 500 600 700 800 900 1000 1100 1200 WAVELENGTH (nm) Package Information Dimensions are in inch [metric] units. R1 C1 3 IN D1 +V – IN + U1 0.1 ufd 4 1 2 –V V OUT 0.1 ufd Specifications are subject to change without prior notice. 1260 Calle Suerte, Camarillo, California 93012 Phone: +1 805.499.0335 | Fax: +1 805.499.8108 | sales@optodiode.com | www.optodiode.com Revision October 20, 2021 Page 2 of 2