Xeon 3 Power Warm White LED OSM5XME3E1E VER C.0 ■Features
●
■Outline
Dimension
Highest Luminous Flux Super Energy Efficiency Long Lifetime Operation Superior ESD protection Superior UV Resistance
3.6
● ●
● ●
BackView
■Applications
●
Read lights (car, bus, aircraft) Portable (flashlight, bicycle) Bollards / Security / Garden Traffic signaling / Beacons In door / Out door Commercial lights Automotive Ext
Anode
Cathode ESD Protection Diode Unit:mm Tolerance:±0.30mm
● ●
● ● ●
■Absolute Maximum Rating
Item
DC Forward Current Pulse Forward Current* Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Lead Soldering Temperature *Pulse width Max.10ms
(Ta=25℃)
Symbol
IF IFP VR PD Topr Tstg Tsol
■Directivity
Value
800 1000 5 3200 -30 ~ +85 -40~ +100 260℃/5sec
Unit
mA mA V mW
0
℃ ℃
-
0
Duty ratio max 1/10
■Electrical -Optical Characteristics
Item
DC Forward Voltage DC Reverse Current Luminous Flux Color Temperature Chromaticity Coordinates* 50% Power Angle
(Ta=25℃)
Min.
3.0 3.5 160 -
■Forward Operating Current (DC)
Unit
V
Forward Current, IF (mA) 800 700 600 500 400 300 200 100 0 0 25 50 75 100 125 RJ-A=30℃/W RJ-A=25℃/W RJ-A=20℃/W RJ-A=15℃/W
Symbol
VF IR Φv CCT x y 2θ1/2
Condition
IF=350mA IF=700mA VR=5V IF=700mA IF=700mA IF=700mA IF=700mA IF=700mA
Typ.
3.3 3.8 180 3000 0.45 0.41 140
Max.
4.0 4.5 10 -
V µA lm K deg
Ambient Temperature, TA (℃)
Note: Don’t drive at rated current more than 5s without heat sink for Xeon 3 emitter series.
LED & Application Technologies
http://www.optosupply.com
VER C.0
Xeon 3 Power Warm White LED OSM5XME3E1E VER C.0 ■ Handling of Silicone Lens LEDs
Notes for handling of silicone lens LEDs ● Please do not use a force of over 3kgf impact or pressure on the silicone lens, otherwise it will cause a catastrophic failure. ● The LEDs should only be picked up by making contact with the sides of the LED body. ● Avoid touching the silicone lens especially by sharp tools such as Tweezers. ● Avoid leaving fingerprints on the silicone lens. ● Please store the LEDs away from dusty areas or seal the product against dust. ● When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the silicone lens must be prevented. ● Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc)
LED & Application Technologies
http://www.optosupply.com
VER C.0
很抱歉,暂时无法提供与“OSM5XME3E1E”相匹配的价格&库存,您可以联系我们找货
免费人工找货