BTRS-7810CG_09

Optoway FEATURES l l l l l l l l l l l l l l BTRS-7810CG 1 *********************************************************************************************************************************************************************** BTRS-7810CG / BTRS-7810C-SPG / BTRS-7810ACG / BTRS-7810AC-SPG 1310 nm TX/ 1490 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver ********************************************************************************************************************************************************************** DESCRIPTION Bi-Directional Single-Fiber Transceiver Compliant with IEEE 802.3ah 1000BASE-BX10 1310 nm LD Transmitter 1490 nm Receiver 1550 nm Enhanced Band Block Link distance up to 10 km Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operating: BTRS-7810CG -20 to 85oC Operating: BTRS-7810ACG LVPECL Differential Inputs and Outputs LVTTL Signal Detect Output Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant The BTRS-7810CG series is high performance module for single fiber communications by using 1310 nm transmitter and 1490 nm receiver. This module is equipped with 3W-TRXTM OE device to reject 1.55 um high power v ideo signal. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section is designed to receive 1490 nm and block 1550 nm signal. This feature is suitable for IEEE 802.3ah 1000BASE-BX10 and ITU-T 983.3 application. The receiver section uses an integrated 1490 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. APPLICATIONS l WDM Gigabit Ethernet Links l SONET/SDH Equipment Interconnect l Fiber Channel Links LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate Distance IEEE (Gb/s) 802.3ah (km) 1000BASE BX10 BX10 1.25 1.25 10 10 TX (nm) 1310 1310 RX (nm) 1490 1490 Voltage (V) 3.3 3.3 Package Temp (oC) 0 to 70 -20 to 85 R X Sens. RoHS TX Power (dBm) Compliant (dBm) -3 to -9 -3 to -9 -20 -20 Yes Yes BTRS-7810CG BTRS-7810ACG SC, 2X5 SC, 2X5 Note: 1. BTRS-XXXXXG is SC/PC receptacle type package with standard case 2. BTRS-XXXXXEG is SC/PC eceptacle type package with extended case 3. BTRS-XXXXX-APBBBG is pigtail type package with different connector, A=S is SC connector, A=F is FC connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm. Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 -20 0 GND 0 Max 85 70 85 260 3.6 Vcc 30 Units o C o C o Notes BTRS-7810CG BTRS-7810ACG/air flow 1m/sec C V V 10 seconds on leads only mA *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V3.0 Optoway Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Power Supply Current Symbol Vcc Topr Min 3.13 0 -20 Typ 3.3 Max 3.47 70 85 1300 280 BTRS-7810CG Units / Notes V o C / BTRS-7810CG o C / BTRS-7810ACG Mb/s mA 2 *********************************************************************************************************************************************************************** 1250 Icc Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3. 47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Typ Max -3 1360 3 Units dBm nm nm dB ns ns dB/Hz ns µA µA mV V V V V ms Notes 1 RMS (σ) Po -9 1261 λ σλ ER 9 Compliant with IEEE 802.3z tr tf RIN TJ IIL IIH VIH - VIL V IL - VCC V IH - VCC VTDIS,L VTDIS,H tDIS -350 300 -2.0 -1.1 0 Vcc – 1 .3 1310 0.26 0.26 -120 0.227 20% to 80% Values 20% to 80% Values 2 350 1600 -1.58 -0.74 0.8 Vcc 1 3 3 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 27-1 PRBS. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3.47V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Optical Return Loss Electrical Data Output Voltage Swing SD Output Voltage -- Low SD Output Voltage -- High Signal Detect Assert Time Signal Detect Deassert Time Symbol --Pin Pa Pd Min ---3 ---31 1.0 1480 20 0 .575 0 2.0 Typ ----------Max -20 ---20 --1500 Units dBm dBm dBm dBm dB nm dB V V V µs µs Notes 1 Transition: low to high Transition: high to low 2,3 ORL VOH – VOL VOL V OH ASMAX ANSMAX 0.930 0.8 Vcc+0.3 100 300 OFF to ON ON to OFF Notes: 1. Minimum sensitivity and saturation levels at BER 1E-12 for a 27-1 PRBS. 2. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm. 3. At least 30 dB optical isolation for the wavelength 1550 to 1600 nm. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V3.0 Optoway CONNECTION DIAGRAM BTRS-7810CG 3 *********************************************************************************************************************************************************************** P IN 1 2 3 4 5 6 7 8 9 10 MS Symbol VEEr VCC r SD RD− RD+ VCC t VEEt TxDis TD+ TDMS Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal. R eceiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Disable. Connect this pin to +3.3V TTL logic “1 ” to disable module To enable module connect to TTL logic low “0” Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC depend on customer's PHY terminate and bias inside Transceiver module TDZ=50R LVPECL Vcc3.3V TD+ Z=5OR 130R 10 9 8 7 6 TXDis(LVTTL) 130R 1uH Vcc3.3V TDTD+ TDis Veet Vcct 10nF 10uF 1uH 10nF 10uF PHY DEVICE BTRS-7XXXC 1 2 3 4 5 10nF 10uF Vcc3.3V Veer Vccr SD RDRD+ RD+ 100R Z=50R LVPECL RDZ=5OR depend on customer's PHY SD TO LVTTL STAGE *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V3.0 Optoway PACKAGE DIAGRAM Units in mm 1) SC Receptacle BTRS-7810CG 4 *********************************************************************************************************************************************************************** A) Standard Case BTRS-7810CG / BTRS-7810ACG B) Extended Case BTRS-7810CEG / BTRS-7810ACEG *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V3.0 Optoway 2) Pigtail BTRS-7810CG 5 *********************************************************************************************************************************************************************** BTRS-7810C-SP50G / BTRS-7810AC-SP50G Note: Length L is 50± 3 cm. Other pigtail’s length is available upon request. Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V3.0