BTRS-9780A-1510-SPG

Optoway FEATURES l l l l l l l l l l l l l BTRS-9780-1510G 1 ********************************************************************************************************************************************************************** BTRS-9780-1510G / BTRS-9780-1510-SPG / BTRS-9780A-1510G / BTRS-9780A-1510-SPG 1510 nm TX / 1590 nm RX , 3.3V / 2.5 Gbps RoHS Compliant Single-Fiber WDM Transceiver ********************************************************************************************************************************************************************* DESCRIPTION Single Fiber WDM Transceiver Speed up to 2.67 Gbps 1510 nm DFB LD Transmitter High Sensitivity 1590 nm APD Receiver D istance Up to 80 km Single +3.3 V Power Supply RoHS Compliant PECL Differential Inputs and Outputs LVTTL Signal Detect Output 0 to 70oC Operating: BTRS-9780-1510G -20 to 85oC Operating: BTRS-9780A-1510G Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC 60825 Compliant The BTRS-9780-1510G series is high performance module for single fiber communications by using 1510 nm transmitter and 1590 nm receiver. The transmitter section uses a multiple quantum well 1510 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1590 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LV-TTL Signal Detect is used. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l WDM OC-48 / STM-16 Links l SONET/SDH Equipment Interconnect l Fiber Channel Links ORDER INFORMATION P /No. Speed (Gb/s) Distance (km) 80 80 TX (nm) 1510 DFB 1510 DFB RX (nm) 1590 1590 Voltage (V) 3.3 3.3 Package T emp (oC) 0 to 70 -20 to 85 TX Power (dBm) 3 to -2 3 to -2 RX Sens. (dBm) -28 -28 BTRS-9780-1510G 2.5 / 1.25 BTRS-9780A-1510G 2.5 / 1.25 2X5 SC 2X5 SC Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Symbol Tstg Topr Min -40 0 -20 Max 85 70 85 260 3.6 Vcc 30 Units o C o C Notes BTRS-9780-1510G BTRS-9780A-1510G Air flow 1m/sec 10 seconds on leads only Soldering Temperature Power Supply Voltage Input Voltage Output Current --Vcc --Iout o 0 GND 0 C V V mA Recommended Operating Conditions Parameter Power Supply Voltage Power supply Current Operating Temperature Symbol Vcc Icc,TX+Icc,RX Topr Min 3.13 0 -20 0.622 2.488 Typ 3.3 220 Max 3.47 280 70 85 2.67 Units / Notes V mA o C / BTRS-9780-1510G o C / BTRS-9780A-1510G air flow 1m/sec Gb/s Data Rate ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V2.0 Optoway Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3. 47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Typ Max 3 1520 1 Units dBm nm nm dB dB ps ps dB/Hz ns µA µA mV V V V V ms Po -2 1480 λ σλ SMSR 30 ER 8.2 Compliant with IEEE 802.3z tr tf RIN TJ IIL IIH VIH - VIL V IL - VCC V IH - VCC VTDIS,L VTDIS,H tDIS -350 300 -2.0 -1.1 0 Vcc – 1 .3 350 1600 -1.58 -0.74 0.8 Vcc 1 BTRS-9780-1510G Notes 1 RMS (σ) 2 ********************************************************************************************************************************************************************** 150 150 -120 0.227 20% to 80% Values 20% to 80% Values 2 3 3 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 27-1 PRBS. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3. 47V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Optical Return Loss Electrical Data Output Voltage Swing SD Output Voltage -- Low SD Output Voltage -- High Signal Detect Assert Time Signal Detect Deassert Time Symbol --Pin Pa Pd Min ---9 ---45 1.0 1580 20 0 .575 0 2.0 Typ ----------Max -28 ---28 --1620 Units dBm dBm dBm dBm dB nm dB V V V µs µs Notes 1 Transition: low to high Transition: high to low 2 ORL VOH – VOL VOL V OH ASMAX ANSMAX 0.930 0.8 Vcc+0.3 100 300 OFF to ON ON to OFF Notes: 1. Minimum sensitivity and saturation levels at BER 1E-10 for a 223-1 PRBS. 2. At least 30 dB optical isolation for the wavelength 1480 to 1520 nm. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V2.0 Optoway CONNECTION DIAGRAM BTRS-9780-1510G 3 ********************************************************************************************************************************************************************** P IN 1 2 3 4 5 6 7 8 9 10 MS Symbol VEEr VCC r SD RD− RD+ VCC t VEEt TxDis TD+ TDMS Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal. R eceiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Disable. Connect this pin to +3.3V TTL logic “1 ” to disable module To enable module connect to TTL logic low “0” Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC depend on customer's PHY terminate and bias inside Transceiver module TDZ=50R LVPECL Vcc3.3V TD+ Z=5OR 130R 10 9 8 7 6 TXDis(LVTTL) 130R 1uH Vcc3.3V TDTD+ TDis Veet Vcct 10nF 10uF 1uH 10nF 10uF PHY DEVICE BTRS-7XXXC 1 2 3 4 5 10nF 10uF Vcc3.3V Veer Vccr SD RDRD+ RD+ 100R Z=50R LVPECL RDZ=5OR depend on customer's PHY SD TO LVTTL STAGE ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V2.0 Optoway PACKAGE DIAGRAM Units in mm 1) SC Receptacle BTRS-9780-1510G 4 ********************************************************************************************************************************************************************** A) Standard Case BTRS-9780-1510G / BTRS-9780A-1510G B) Extended Case BTRS-9780E-1510G / BTRS-9780AE-1510G ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V2.0 Optoway 2) Pigtail BTRS-9780-1510G 5 ********************************************************************************************************************************************************************** BTRS-9780-1510-SP50G / BTRS-9780A-1510-SP50G Note: Length L is 50± 3 cm. Other pigtail’s length is available upon request. Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V2.0