GBS-9280-C310

Optoway FEATURES l l l l l l l l l l l l l l l GBS-9280-CXX0G 1 ********************************************************************************************************************************************************************** GBS-9280-CXX0G (RoHS Compliant) 5V / CWDM / 2.125 Gb/s Single-Mode Gigabit Interface Converter (GBIC) ********************************************************************************************************************************************************************** DESCRIPTION 18-Wavelength CWDM GBIC Transceivers 2 .5 Gbps Bi-directional Data Links C ompliant with 1X / 2X Fibre Channel FC-PI 13.0 C ompliant with Gigabit Interface Converter (GBIC) Specification Rev. 5.5 C WDM DFB Laser Transmitter APD High Sensitivity Receiver Multi-rate Operation for 2.5 / 2.125 / 1.062 / 1.25 Gbps Duplex SC Connector 28 dB Power Budget At Least SCA-2 Host Connector Single +5 V Power Supply D ifferential PECL Inputs and Outputs TTL RX-LOS Output H ot Pluggable C lass 1 Laser International Safety Standard IEC-60825 Compliant The GBS-9280-CXX0G series optical transceivers meet the Gigabit Interface Converter (GBIC) specification Rev. 5.5. It satisfies the optical interface specifications defined in IEEE 802.3z Drift 5.0 1000 BASE for Gigabit Ethernet and 1x/2x Fiber Channel FC-PI13.0. This module is designed for single-mode fiber and operates at a nominal wavelength of CWDM. There are eighteen center wavelengths available from 1270 nm to 1610 nm, each step 20 nm. A guaranteed minimum optical link budget of 28 dB is offered. The transmission distance is depended on the wavelength and loss of fiber. The transmitter section uses a multiple quantum well CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL input / output logic interface is used. TTL RX-LOS output simplifies interface to external circuitry. A 20-pin SCA-2 host connector is used to connect the converter to the host system. l RoHS Compliant APPLICATIONS l l l l Switch to Switch Interface H igh Speed Interface for File Servers Bus Extension Application D ata Storage l Dual Rate 1.06 / 2.125 Gb/s Fibre Channel LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P /No. GBS-9280-CXX0 Bit Rate (Gb/s) 2.5 Power Wavelength Budget (dB) (nm) > 28 CWDM* Package SC GBIC Temp. (oC) 0 to 70 TX Power (dBm) 5 to 0 RX Sens. (dBm) -28 RoHS Compliant Yes CWDM Wavelength (0 to 70 oC) Central Min. Typ. Max. Central Wavelength (nm) (nm) (nm) Wavelength -C270 1264.5 1270 1277.5 -C450 -C290 1284.5 1290 1297.5 -C470 -C310 1304.5 1310 1317.5 -C490 -C330 1324.5 1330 1337.5 -C510 -C350 1344.5 1350 1357.5 -C530 -C370 1364.5 1370 1377.5 -C550 -C390 1384.5 1390 1397.5 -C570 -C410 1404.5 1410 1417.5 -C590 -C430 1424.5 1430 1437.5 -C610 CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm. Min. (nm) 1444.5 1464.5 1484.5 1504.5 1524.5 1544.5 1564.5 1584.5 1604.5 Typ. (nm) 1450 1470 1490 1510 1530 1550 1570 1590 1610 Max. (nm) 1457.5 1477.5 1497.5 1517.5 1537.5 1557.5 1577.5 1597.5 1617.5 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Power Supply Voltage Input Voltage Symbol Tstg Topr Vcc --Min -40 -5 -0.5 -0.5 Max 85 70 6 Vcc Units o C o C V V GBS-9280-CXX0G Notes Air flow 1m/sec 2 *********************************************************************************************************************************************************************** Recommended Operating Conditions Parameter Power Supply Voltage Power Supply Current Operating Temperature Data Rate Symbol Vcc ITX + IRX Topr Min 4.75 0 1.0625 / 1.25 2 .125 / 2.5 Typ 5 200 Max 5.25 300 70 2 .5 Units V mA C Gb/s o Conditions Reference to GND. Air flow 1m/sec Transmitter Specifications (0 oC < Topr < 70 oC, 4.75V < Vcc < 5.25V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Optical Rise Time Optical Fall Time Electrical Differential Input Voltage Transmit Fault Load Transmit Fault Output-Low Transmit Fault Output-High TX-Disable Input - Low TX-Disable Input - High TX-Disable Assert Time TX-Disable Negate Time Time to initialize, includes reset of TX-FAULT TX FAULT from fault to assertion TX-Disable time to start reset Symbol Po λ ∆λ SMSR ER tr tf VIH - V IL TX-FAULTLOAD VTX-FAULT-L VTX-FAULT-H V TX-DISABLE-L V TX-DISABLE-H t_off t-on t-int t-fault t-reset 10 Min 0 λ-5.5 30 9 --150 150 2.0 10 0.5 Vcc + 0.3 0 .8 Vcc + 0.3 10 1 300 100 Typ --λ --Max 5 λ+7.5 1 Units dBm nm nm dB dB ps ps Vp-p kΩ V V V V µs ms ms µs µs Notes 1 2 -20 dB Width 20% to 80% value 20% to 80% value 0.65 4 .7 0 .0 Vcc – 0 .5 0 2 .0 3 1. Output power is power coupled into a 9/125 µm SM fiber. 2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm. 3. Pull-up resistor on host Vcc. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V) Parameter Optical Sensitivity @2.125Gb/s @ BER=10-12 GBS-9280-CXX0G Symbol SENS Pin Min ---9 1.0 1260 ---40 0.37 Typ ----------Max -28 --1620 -28 --2.0 0.35 0.35 10 0.5 Vcc 100 100 Units dBm dBm dB nm dBm dBm Vp-p ns ns kΩ V V µs µs Notes 4 4 3 *********************************************************************************************************************************************************************** Maximum Input Power Signal detect – H ysteresis Wavelength of Operation RX-LOS – Asserted RX-LOS – Deasserted Electrical Differential Output Voltage Data Output Rise Time Data Output Fall Time Receiver Loss of Light Load Loss of Signal Output Voltage --- Low Loss of Signal Output Voltage --- High Loss of Signal Assert Time (off to on) Loss of Signal Deassert Time (on to off) Pa Pd ±RX-DAT TrRX-DAT TfRX-DAT RX-LOSLOAD RX-LOSL RX-LOSH TA,RX-LOS TD,RX-LOS Transition: low to high Transition: high to low 4 .7 0 2 .4 5 4. Minimum sensitivity and saturation levels at BER=1E-12 for a 2 7-1 PRBS. 5. Pull-up resistor on host Vcc. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway PIN ASSIGNMENT GBS-9280-CXX0G 4 *********************************************************************************************************************************************************************** PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Signal Name RX-LOS RGND RGND MOD-DEF(0) MOD-DEF(1) MOD-DEF(2) TX-DIABLE TGND TGND TX-FAULT RGND -RX-DAT +RX-DAT RGND VCCR VCCT TGND +TX-DAT -TX-DAT TGND Sequence 2 2 2 2 2 2 2 2 2 2 1 1 1 1 2 2 1 1 1 1 Description Receiver Loss of Signal, logic high, open collector compatible, 4.7K to 10K ohm pull-up to VCCT on host Receiver Ground Receiver Ground TTL Low SCL Serial Clock Signal SDA Serial Data Signal Transmitter Disable, logic high, open collector compatible Transmitter Ground Transmitter Ground Transmitter Fault, logic high, open collector compatible, 4.7K to 10K ohm pull-up to V CCT on GBIC Receiver Ground Receiver Data Bar, Differential PECL, AC coupled Receiver Data, Differential PECL, AC coupled Receiver Ground Receiver +3.3V Supply Transmitter +3.3V Supply Transmitter Ground Transmitter Data, Differential PECL, AC coupled Transmitter Data Bar, Differential PECL, AC coupled Transmitter Ground A sequence value of 1 indicates that the signal is in the first group to engage during plugging of a module. A sequence value of 2 indicates that the signal is the second and last group. The two guide pins on the connector are electrically connected to the transceiver circuit ground. These two guide pins make contact with circuit prior to sequence 1 signals. Module Definition Module Definition 4 MOD-DEF(0) PIN 4 TTL Low MOD-DEF (1) PIN 5 SCL MOD-DEF (2) PIN 6 SDA Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway PACKAGE DIAGRAM Units in mm GBS-9280-CXX0G 5 *********************************************************************************************************************************************************************** Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0