PDA-1300-3-VSA

Optoway DESCRIPTION PDA-1300-3 **************************************************************************************************************************************************************** PDA-1300-3 3 GHz InGaAs PIN Photodiode Module for CATV/Wireless/SAT Receiver **************************************************************************************************************************************************************** PDA-1300-3 InGaAs PIN Photodiode series are high quality 3 GHz analog photodetectors designed for CATV, CDMA / W-CDMA, and Satellite receiver applications. These coaxial modules are optically aligned to optimize performance and balance the parameters of responsivity, distortion and back reflection. FEATURES Electro-Optical Low Inter-modulation Distortion High Responsivity Low Back Reflection Packaging Single mode 900 μm fiber with or without a connector Single mode 250 μm fiber with or without a connector ABSOLUTE MAXIMUM RATINGS Stress in excess of the absolute maximum rating can cause permanent damage to the device. These are absolute stress rating only. Functional operation of the device is not implied at these or any other conditions in excess of these given in the operational sections of the datasheet. Exposure to absolute ratings for extended periods can adversely affect device reliability. Parameter Forward Current Reverse Current Reverse Voltage Power Dissipation Soldering Temperature Operating Temperature Range Storage Temperature Range Symbol Min Max 10 10 25 100 260/10 85 85 Unit mA mA V mW o C/sec o C o C PDISS Tsolder Top Tstg -40 -40 CHARACTERISTICS ELECTRICAL AND OPTICAL CHARACTERISTICS (TC = 25ºC, VR = 12V) Symbol R Parameter Responsivity nd Test Conditions λ= 1300nm λ= 1550nm Min. 0.8 0.85 Typ. Max. Unit A/W IM2 BR Idark C BW 2 Order Intermodulation Modulation Back Reflection Dark Current Capacitance Bandwidth Fiber Length Note (1*) λ= 1550 nm -70 -40 1 0.8 3.0 1.0 1.5 dBc dB nA pF GHz m VR=5V f=1MHz, Case Ground, VR=5V 3 dB down, RL=50Ω 1*. IM2 measured at VR=12V, λ=1550nm, Pavg=0dBm, MI=0.7, RLOAD=50 ohm, f1=400 MHz, f2=450MHz **************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 4/9/2009 V2.0 Optoway PRECAUTIONS for USE PDA-1300-3 **************************************************************************************************************************************************************** ESD protection is imperative. Use of grounding straps, anti-static mats, and other ESD protective equipment is recommended when handling or testing an InGaAs PIN or any other junction photodiodes. Fiber pigtails should be handled with less than 10N pull and with a bending radius greater than 30 mm. MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Note: 1. Specifications subject to change without notice. 2. Other PIN assignment is available upon request. ORDER INFORMATION Part No.: P D A − 1 3 0 □− 3− □□□ Code 0 1 Fiber Buffer 900 μm 250 μm Code Flange V Vertical H Horizontal X No Flange Code X SA FA Connector Type No Connector SC/APC FC/APC **************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 4/9/2009 V2.0 Optoway Revision History Version 1.0 2.0 Initial datasheet Modify mechanical dimension PDA-1300-3 **************************************************************************************************************************************************************** Subject Release Date 2007/1/1 2009/4/9 **************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 4/9/2009 V2.0