Optoway
SPB-9610LVWG
FEATURES
l l l l l l l l l l l l l l l
SPB-9610LVWG
1
***********************************************************************************************************************************************************************
(RoHS Compliant)
DESCRIPTION
1310 nm TX / 1550 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video Digital Diagnostic SFP Transceiver
**********************************************************************************************************************************************************************
SMPTE 297-2006 Compatible 1 -Fiber Bi-Directional SFP Optical Transceiver Small Form-Factor Pluggable (SFP) MSA compatible Speed from 50 Mbps to 3Gbps with up to 30 km Single-mode Fiber D istance up to 10 km for 3G-SDI Support Video Pathological Patterns for SD-SDI, HD-SDI and 3G-SDI 1310 nm Transmitter 1550 nm Receiver SFF-8472 Digital Diagnostic Function Simplex LC Connector Single +3.3 V Power Supply RoHS-6 Compliant 0 to 70oC Operation Hot Pluggable Class 1 Laser International Safety Standard IEC-60825 Compliant
The SPB-9610LVWG is a 1-fibre BIDI single mode transceiver module designed to transmit/receive optical serial digital signals as defined in SMPTE 297-2006. It supports from 50 Mbps to 3 Gbps and is specifically designed for transmitted the SMPTE 259M, SMPTE 344M, SMPTE 292M and SMPTE 424M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It is with 1310 nm laser transmitters. The receiver section uses an integrated 1550 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The transmitter can transmit signal from 50 Mbps to 3 Gbps with up to 30 km of single-mode fiber. A maximum distance of 10 km is achievable with 3Gbps pathological signals.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
APPLICATIONS
l SMPTE 297-2006 Compliant Electrical-to-Optical Interfaces l High-density Video Routers
ORDER INFORMATION
P /No. TX λ (nm) transceiver 50 to 3000 1310 transceiver 50 to 3000 1550 DFB Type Bit Rate (Mb/s) RX Power (dBm) 0 to -5 -3 to -8 λ (nm) 1550 1310 Package Temp RoHS (oC) Compliant Sen. (dBm) 0 to -20 LC SFP with DMI 0 to 70 Yes 0 to -20 LC SFP with DMI 0 to 70 Yes
SPB-9610LVWG SPB-9710LVWG
LINK DISTANCE
SDI 3G-SDI HD-SDI SD-SDI Bit Rate 2.97Gbps 1.485Gbps 270Mbos Max. Link Distance (km) 10 21 30
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
8/1/2009 V1.0
Optoway
Absolute Maximum Ratings
Absolute Maximum Ratings Parameter Storage Temperature O perating Case Temperature P ower Supply Voltage E SD Tolerance on all pins R elative Humidity Symbol Tstg Tc Vcc --Min -40 0 0 5 Max 85 70 4 1 95 Units o C o C V KV HBM % RH
SPB-9610LVWG
2
***********************************************************************************************************************************************************************
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Notes
non-condensing
R ecommended Operating Conditions Parameter Symbol P ower Supply Voltage Vcc O perating Case Temperature Tc B aud Rate P ower Supply Current Icc
Min 3.13 0 50
Typ 3.3
200
Max 3.47 70 3000 300
Units / Notes V o C Mb/s mA
Transmitter Specifications (0 oC < Tc < 70 oC, 3.13V < Vcc < 3.47V)
Parameter Optical O ptical Transmit Power Output Center Wavelength Output Spectrum Width E xtinction Ratio R elative Intensity Noise O ptical Rise Time / Fall Time Symbol Po λ ∆λ ER RIN tr / tf Min -5 1260 --5 Typ -2 1310 1.5 7.5 Max 0 1360 3 -120 135 270 800 1.5 200 0 2 .0 2 .5 0 1200 0 .8 Vcc+0.3 Vcc+0.3 0 .5 Units dBm nm nm dB dB/Hz ps ps ps ns mVp-p V V V V Notes 1 RMS (σ)
2, SMPTE 424M 2, SMPTE 292M 2, SMPTE 344M 2, SMPTE 259M AC coupled input TX Output Enabled TX Ouput Disabled
E lectrical D ifferential Input Voltage D isable Input Voltage -- Low D isable Input Voltage -- High SCL, SDA 1. 2.
V IH - VIL VTDIS,L VTDIS,H V OH V OL
Output power is power coupled into a 9/125 µm single mode fiber. 20% to 80%, unfiltered.
Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V)
Parameter Optical Wavelength of Operation Sensitivity for SMPTE 424M 2.97 Gb/s Sensitivity for SMPTE 292M 1.485 Gb/s Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Optical Return Loss Electrical CML Output (Differential) Symbol Min 1480 0 0 0 0 ---29 1 Typ -----------27 550 660 850 Max 1580 -18 -20 -20 -21 -23 --6 Units nm dBm dBm dBm dBm dBm dBm dB dB mVp-p Notes 3 Pathological PRBS 223-1, BER=1E-12 Pathological PRBS 223-1, BER=1E-12 Transition: low to high Transition: high to low
Sen Sen Pa Pd
AC coupled output
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
8 /1/2009 V1.0
Optoway
Optical Rise Time / Fall Time tr / tf Output LOS Voltage -- Low Output LOS Voltage -- High SCL, SDA V OL V OH V OH V OL 0 2 .5 2 .5 0 135 270 800 1.5 0 .5 Vcc+0.3 Vcc+0.3 0 .5 ps ps ps ns V V V V
SPB-9610LVWG
4, SMPTE 424M 4, SMPTE 292M 4, SMPTE 344M 4, SMPTE 259M
3
***********************************************************************************************************************************************************************
IOL=-1.6mA, 1 TTL unit load IOH=40µ A, 1 TTL unit load
3. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm. 4. 20% to 80%, unfiltered.
MODULE DEFINITION
Module Definition 4 PIN 5 SCL PIN 6 SDA Interpretation by Host Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
8 /1/2009 V1.0
Optoway
CONNECTION DIAGRAM
SPB-9610LVWG
4
***********************************************************************************************************************************************************************
PIN
1 2 3 4 5 6 7 8 9 10
Signal Name
TX GND TX Fault TX Disable MOD-DFE2 MOD-DEF1 MOD-DEF0 N/C LOS RX GND RX GND
Description
Transmitter Ground Transmitter Fault Indication T ransmitter Disable (Module disables on high or open) Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module Not Connected Loss of Signal Receiver Ground Receiver Ground
PIN
11 12 13 14 15 16 17 18 19 20
Signal Name
Description
RX GND Receiver Ground RX DATA OUT- Inverse Receiver Data Out RX DATA OUT+ Receiver Data Out RX GND Vcc RX Vcc TX TX GND TX DATA IN+ TX DATA INTX GND Receiver Ground Receiver Power – 3 .3V±5% Transmitter Power – 3 .3V±5% Transmitter Ground Transmitter Data In Inverse Transmitter Data In Transmitter Ground
MODULE DEFINITION
Module Definition 4 MOD-DEF2 PIN 4 SDA MOD-DEF1 PIN 5 SCL MOD-DEF0 PIN 6 LV-TTL Low Interpretation by Host Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
8 /1/2009 V1.0
Optoway
RECOMMENDED CIRCUIT SCHEMATIC
VeeT Tx_DISABLE Tx_FA ULT (1,17,20) 3 2 4. 7K to 10KΩ TD + 18 Z=50Ω TD 19 Z=50Ω 1μH 10μF 1μH 100nF 10μF 100nF Vcc 3.3V 10μF TD + TD Re-Clocker
SPB-9610LVWG
5
***********************************************************************************************************************************************************************
Tx_DISABLE Tx_FA ULT
LD Driver
100Ω
VccT
16 100nF
VccR
15
Protocol IC
RD -
12 Z=50Ω RD + Re-Clocker
POST Amp
RD +
13 Z=50Ω 4.7K to 10KΩ
RD -
LOS VeeR MOD_DEF(0)
8 (9,10,11,14) 6 5 4 4.7K to 10KΩ Vcc 3.3V 4. 7K to 10KΩ
LOSS OF SINGA L
MODULE DETECT SCL SDA 4.7K to 10KΩ
EEPROM
MOD_DEF(1) MOD_DEF(2)
SFP module
PACKAGE DIAGRAM Units in mm
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
8 /1/2009 V1.0
Optoway
REVISION HISTORY
Version
1 .0 Initial datasheet
SPB-9610LVWG
6
***********************************************************************************************************************************************************************
Subject
Release Date
2008/10/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
8 /1/2009 V1.0