SPL-54B33B-G

Optoway SPL-54B33B-G / SPL-54B33B-AG SPL-54B33B-G 1 **************************************************************************************************************************************************************************** (RoHS Compliant) 3.3V / 622 Mbps 1490 nm Continuous-Mode TX / 155 Mbps 1310 nm Burst-Mode RX ITU-T G.983.3 B-PON CLASS B SFP OLT Transceiver (with Reset-Less RX) *************************************************************************************************************************************************************************** FEATURES l Class B Optical Line Terminal (OLT) for ITU-T G.983.3 B-PON l SFP SC Transceiver l 622 Mbps / 1490 nm Continuous-Mode Transmitter l 155 Mbps / 1310 nm Burst-Mode Receiver with 2R Output l Resetless BM Receiver Design l BM RX capable of Handling Packet-to-Packet Spacing with Guard Time less than 50 ns for 15dB Packet Optical Power Difference l High Resistance of BM RX to DC Optical Background l 0 to 70oC Operating: SPL-54B33B-G l -20 to 85oC Operating: SPL-54B33B-AG l RoHS Compliant l Single +3.3 V Power Supply l Transmitter: AC Coupling Input l Receiver: DC Coupling Output l Class 1 Laser International Safety Standard IEC 60825 Compliant DESCRIPTION SPL-54B33B series is a small form factor pluggable transceiver for ITU-T G.983.3 Class B optical line terminal (OLT) with 622 Mbps/1490 nm in downstream and 155 Mbps /1310 nm in upstream. It is with the SFP 20-pin connector to allow hot plug capability. The SPL-54B33B series is high performance module for single fiber communications by using 1490 nm continuous-mode transmitter and 1310 nm burst-mode receiver. The transmitter section uses a multiple quantum well 1490 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1310 nm burst-mode detector preamplifier (IDP) mounted in an optical header and a burst-mode limiting post-amplifier IC. Unlike the conventional BM RX, the RX does not requires reset pulse to receive optical data packets with different optical power. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. Temp λ (nm) 1310 1310 APPLICATIONS l Broadband PON System l ATM PON System ORDER INFORMATION P/No Class Type S PL-54B33B-G S PL-54B33B-AG B B CNT CNT TX Speed (Mb/s) 622 622 1490 DFB 1490 DFB RX Power (dBm) 4 / -1 4 / -1 BM, 2R BM, 2R Package RoHS Compliant λ (nm) Type Speed (Mb/s) 155 155 Sens. (dBm) -8 / -31 (oC) 0 / 70 SC SFP SC SFP Yes Yes -8 / -31 -20 / 85 Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage Symbol Tstg Topr Vcc Min -40 0 -20 -0.5 Max 85 70 85 3.6 Units o C o C V Notes SPL-54B33B-G SPL-54B33B-AG Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Power Supply Current Symbol Vcc Topr ICC (TX+RX) Min 3.13 0 -20 Max. 3.47 70 85 300 Unit V o C mA Units / Notes V SPL-54B33B-G SPL-54B33B-AG ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2007 V2.0 Optoway Transmitter Specifications ( 0oC < Topr < 70oC, 3.13V < Vcc < 3.47V ) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Data Rate Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage TX Disable Input Voltage – Low TX Disable Input Voltage – High TX Disable Assert Time TX Disable Deassert Time TX Fault Output Voltage -- Low TX Fault Output Voltage -- High Symbol Po λ Δλ SMSR ER Min. -1 1480 30 10 622 1.0 1.0 -120 0.55 -350 VIH - VIL T DIS, L T DIS, H TASSERT TDEASSERT T FaultL T FaultH 0.4 0 2.0 350 2.4 0.8 Vcc 10 1 0.5 Vcc+0.3 Typ. Max. 4 1500 1 Units dBm nm nm dB dB Mb/s ns ns dB/Hz ns µA µA V V V µs ms V V SPL-54B33B-G Notes 1 -20 dB Width 2 ***************************************************************************************************************************************************************************** 10% to 90% Values 10% to 90% Values RIN Peak-to-Peak 2 2 0 2.0 3 3 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX. 3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage). Receiver Characteristics ( 0oC < Topr < 70oC, 3.13V < Vcc < 3.47V ) Parameter Symbol Min. Typ. Max. Units dBm dBm nm Mb/s ns dB dB V V V V ns ns Notes 4 4 5 6,7 Optical Sensitivity Sen -31 Saturation Optical Power Sat -8 Wavelength of Operation 1260 1360 Data Rate 155 Packet-to-Packet Guard Time tg 50 DC Optical Tolerance Sen +3 Optical Return Loss 14 Electrical Data Output Voltage – Low VOL - VCC -2.0 -1.58 Data Output Voltage – H igh V OH - VCC -1.1 -0.74 Signal Detect Output Voltage -- Low VOL 0.5 Signal Detect Output Voltage -- High VOH 2.0 Signal Detect Assert Time ASMAX 10 15 30 Signal Detect Deassert Time ANSMAX 500 550 700 Rest Between Packet Resetless 4. Sensitivity and saturation levels at BER 1E-10 for a PRBS 223-1 @ER=10. 5. At least 30 dB optical isolation for the wavelength 1480 to 1500 nm. 6. No reset is needed. 7. The optical power difference between neighboring packets is up to 15 dB at 155 Mbps. 8. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs. 8 8 Transition: low to high Transition: high to low ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 /1/2007 V2.0 Optoway BM CLOCK & DATA RECOVERY OPTICAL PACKET-1 SPL-54B33B-G 3 ***************************************************************************************************************************************************************************** RECEIVED OPTICAL SIGNAL OPTICAL PACKET-2 BM RX OUTPUT BM CDR OUTPUT (SYNC. WITH SYSTEM CLK) SYSTEM CLK SYNC. WITH SYSTEM CLK OPTICAL INPUT SPL-54B33B ZTLT-35L33L-K BM RX OUT ZB155CDR ZB155CDR BM CDR BM CDR RECOVERED DATA SYSTEM CLK ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 /1/2007 V2.0 Optoway CONNECTION DIAGRAM SPL-54B33B-G 4 ***************************************************************************************************************************************************************************** PIN 1 2 3 4 5 6 7 8 9 10 Signal Name TX GND TX Fault TX Disable MOD-DFE2 MOD-DEF1 MOD-DEF0 N/C LOS RX GND RX GND Description Transmitter Ground Transmitter Fault Indication Transmitter Disable (Module disables on high or open) Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module Not Connected Loss of Signal Receiver Ground Receiver Ground PIN 11 12 13 14 15 16 17 18 19 20 Signal Name RX GND RX DATA OUTRX DATA OUT+ RX GND Vcc RX Vcc TX TX GND TX DATA IN+ TX DATA INTX GND Description Receiver Ground Inverse Receiver Data Out Receiver Data Out Receiver Ground Receiver Power – 3.3V±5% Transmitter Power – 3 .3V±5% Transmitter Ground Transmitter Data In Inverse Transmitter Data In Transmitter Ground MODULE DEFINITION Module Definition 4 MOD-DEF2 PIN 4 SDA MOD-DEF1 PIN 5 SCL MOD-DEF0 PIN 6 LV-TTL Low Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 /1/2007 V2.0 Optoway RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_ DISABLE Tx_ FAULT (1 7,20) ,1 3 2 4.7K to 10KΩ TD + 18 Z=50 Ω TD 19 Z=50 Ω Vcc T 16 10nF 1μH Vcc 3 .3V 10 F μ 10 nF 1μH Vcc R 15 10nF 10 F μ Vcc 3 .3V 10 F μ TD Tx_ FAULT Tx_ DISABLE SPL-54B33B-G 5 ***************************************************************************************************************************************************************************** Vcc 3.3V depending on customer's PHY TD + LVPECL LD Driver 100Ω CDR or PHY DEVICE Vcc 3.3V 130Ω 13 Ω 0 10 nF RD LVPECL RD - 12 Z=50 Ω POST Amp RD + 13 Z=50 Ω 4.7K to 10KΩ RD + 82Ω 82 Ω LOS Vee R MOD_DEF(0 ) 8 LOSS OF S INGAL (9,10,11,14) 6 5 To I2C Bus 4 4.7K to 10KΩ 4.7K to 10KΩ 4.7K to 10KΩ Vcc 3.3V EEPROM MOD_DEF(1) MOD_DEF(2) SFP OLT Module PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 /1/2007 V2.0