SPM-2100WG

Optoway FEATURES l l l l l SPM-2100WG 1 ********************************************************************************************************************************************************************* SPM-2100WG / SPM-2100BWG / SPM-2100AWG (RoHS Compliant) 3.3V / 850 nm / 10.3 Gb/s Digital Diagnostic SFP+ LC Multi-Mode TRANSCEIVER ******************************************************************************************************************************************************************** DESCRIPTION l l l l l l l l Up to 10.5 Gb/s Bi-directional Data Link Complaint to SFP+ MSA Compliant with 10GBASE-SR Compliant with 10GBASE- SW Link Distance at 10.3 Gbd 300 m links with OM3 MMF Cables 82 m links with OM2 MMF Cables 33 m links with OM1 MMF Cables SFF-8472 Digital Diagnostic Function AC/AC Coupling according to MSA Single +3.3 V Power Supply RoHS 6/6 Compliant 0 to 70oC Operation: SPM-2100WG -10 to 85oC Operation: SPM-2100BWG -40 to 85oC Operation: SPM-2100AWG Class 1 Laser International Safety Standard IEC 60825 Compliant The SPM-2100WG series multi-mode transceivers is SFP+ module for bi-directional serial optical data communications such as10GBASE-SR and 10GBASE-SW. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. The transmitter section uses a Vertical Cavity Surface Emitted Laser (VCSEL) and is a Class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. LASER SAFETY This multi-mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. Wavelength (nm) 850 VCSEL 850 VCSEL 850 VCSEL Package SFP+ with DMI SFP+ with DMI SFP+ with DMI Temp. (oC) 0 to 70 -10 to 85 -40 to 85 RoHS Compliant Yes Yes Yes APPLICATIONS l 10G Ethernet at 10.3125Gbps ORDER INFORMATION P /No. Bit Rate (Gb/s) 10.3 10.3 10.3 10GBASE SR / SW SR / SW SR / SW Distance (m) 300 / 82 / 33* 300 / 82 / 33* 300 / 82 / 33* SPM-2100WG SPM-2100BWG SPM-2100AWG *: 300m for OM3 MMF, 82m for OM2 MMF, and 33 m for OM1 MMF. Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Symbol Tstg Topr Min -40 0 -10 -40 5 0 Max 85 70 85 85 95 4 Units o C o C Notes SPM-2100WG SPM-2100BWG SPM-2100AWG Non condensing Operating Relative Humidity Power Supply Voltage RH Vcc % V Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Symbol Vcc Topr Min 3.14 0 -10 -40 Typ 3.3 Max 3.46 70 85 85 180 10.5 Units / Notes V o C Power Supply Current Data Rate ICC (TX+RX) 135 10.3125 mA Gb/s ********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2009/10/1 V3.0 Optoway Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Optical Modulation Amplitude Output Center Wavelength Output Spectrum Width Transmitter Dispersion Penalty Relative Intensity Noise 1. 2. Symbol Po, Avg Po, OMA λc σλ TDP RIN Min -7.3 * 840 Typ Max -1.0 860 0.45 3.9 -128 Units dBm mW nm nm dB dB/Hz 850 SPM-2100WG Notes 1 2 RMS (σ) 12 dB reflection 2 *********************************************************************************************************************************************************************** Output power is power coupled into a 50/125 µm multi-mode fiber. *:Trade-offs between center wavelength, spectral width, and minimum OMA based on IEEE 802.3ae Table 52-8 are used. Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Receiver Sensitivity Stress Sensitivity (OMA) Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Optical Return Loss Symbol Sens1 Sens2 P MAX LOSD LOSA λc ORL Min Typ --------850 Max -9.9 180 -14 --860 -12 Units dBm µWp-p dBm dBm dBm nm dB Notes 3 3, ISI=3.5 dB Transition: low to high Transition: high to low -1 ---25 840 3. Measured with worst ER; BER < 10-12 and PRBS 2 31-1. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min Typ 10.3125 100 150 10.3125 100 600 Max 10.5 1200 10.5 700 Units Gb/s Ω mVpp Gb/s Ω mVpp Notes Internally AC coupled 350 Internally AC coupled 2.0 GND 2.4 GND Vcc+0.3 0.8 Vcc 0.5 V V V V LINK LENGTH Data Rate / Standard 10.3 GBd Fiber Type 62.5/125 µ m MMF (OM1) 50 / 125 µm MMF (OM2) 50 / 125 µm MMF 50 / 125 µm MMF 50 / 125 µm MMF (OM3) Model Bandwidth @ 850nm (MHz-km) 200 500 900 1500 2000 Distance Range (m) 2 to 33 2 to 82 2 to 150 2 to 240 2 t0 300 ********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2009/10/1 V3.0 Optoway CONNECTION DIAGRAM SPM-2100WG 3 *********************************************************************************************************************************************************************** PIN Signal Name 1 2 VEET TX_Fault Description Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = TX off, Logic “0” = TX on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Absent, connected to VEET or VEER in the module. RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground PIN Signal Name 11 12 VEER RD- Description Receiver Signal Ground Inverse Receiver Data Out 3 4 5 6 7 TX_Disable SDA SDL MOD-ABS RS0 13 14 15 16 17 RD+ VEER VCCR VCCT VEET Receiver Data Out Receiver Signal Ground Receiver Power – 3 .3V±5% Transmitter Power – 3 .3V±5% Transmitter Signal Ground 8 9 RX_LOS RS1 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 10 VEER 20 VEET Transmitter Signal Ground MODULE DEFINITION Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2009/10/1 V3.0 Optoway RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT ( 1,17,20) 3 2 10 KΩ TD + 18 Z=50Ω TD 19 Z=50Ω Vcc T 16 0.1μF 4 .7 μH Vcc 3.3V 22 μF 0.1μF 0.1μF Vcc R 15 0.1μF 22 μF 4 .7 μH TD TD + Tx_DISABLE Tx_FAULT SPM-2100WG 4 *********************************************************************************************************************************************************************** LD D river 100Ω SerDes IC Protocol IC RD - 12 Z=50Ω 100Ω RD - POST Amp RD + 13 Z=50Ω 10 KΩ RD + depending on SE D S RE LOSS OF SINGAL LOS Vee R RS1 30K Ω 30K Ω MOD_ABS RS0 8 ( 10,11,14) 9 7 TX Rate Select RX Rate Select 6 5 4 10 KΩ 10 KΩ 10 KΩ Vcc 3.3V MODU LE DETECT SCL SDA EEPROM SCL SDA SFP+ module PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2009/10/1 V3.0 Optoway REVISION HISTORY V ersion 1 .0 2 .0 3 .0 SPM-2100WG 5 *********************************************************************************************************************************************************************** Subject Initial datasheet Add SPM-2100BWG for -10 to 85oC operating Add SPM-2100AWG for -40 to 85 oC operating Release Date 2007/8/1 2009/3/1 2009/10/1 ********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2009/10/1 V3.0