SPM-9100V-1TG

Optoway SPM-9100V-1TG 850 nm / 3 Gb/s Single Optical Multi-Mode Transmitter FEATURES DESCRIPTION SPM-9100V-1TG 1 *********************************************************************************************************************************************************************** (RoHS Compliant) ********************************************************************************************************************************************************************** l SMPTE 297-2006 Compatible l Speed from 50 Mbps to 3Gbps with up to 1000 m Multi-mode Fiber l D istance up to 300 m for 3G-SDI l Support Video Pathological Patterns for SD-SDI, HD-SDI and 3G-SDI l Single Transmitter with Simplex LC l Based on Industry Standard SFP l TTL Laser Disable Input l Single +3.3 V Power Supply l RoHS-6 Compliant l 0 to 70oC Operation l Hot Pluggable l Class 1 Laser International Safety Standard IEC-60825 Compliant The SPM-9100V-1TG is a single channel optical multimode transmitter module designed to transmit optical serial digital signals as defined in SMPTE 297-2006. It supports from 50 Mbps to 3 Gbps and is specifically designed for transmitted the SMPTE 259M, SMPTE 344M, SMPTE 292M and SMPTE 424M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability. It is with 850 nm VCSEL transmitters. The transmitter can transmit signal from 50 Mbps to 3 Gbps with up to 1000 m of multi-mode fiber when using the SPM-9100V-1RG/2RG as the receiver. A maximum distance of 300 m is achievable with 3Gbps pathological signals. LASER SAFETY This multi-mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l SMPTE 297-2006 Compliant Electrical-to-Optical Interfaces l High-density Video Routers ORDER INFORMATION P /No. Type Bit Rate (Mb/s) 50 to 3000 Bit Rate (Mb/s) 50 to 3000 TX1 λ (nm) 850 RX1 λ (nm) 850 Sen. (dBm) 0 to -15 λ (nm) Power (dBm) -2 to -7 λ (nm) TX2 Power (dBm) Package Temp (oC) 0 to 70 Temp (oC) 0 to 70 RoHS Compliant Yes RoHS Compliant Yes SPM-9100V-1TG P /No. 1-TX Type LC SFP RX2 Sen. (dBm) LC SFPI P ackage RELATED PRODUCTS SPM-9100V-1RG 1-RX LINK DISTANCE Transmitter SPM-9100V-1TG Receiver SPM-9100V-1RG SDI 3G-SDI HD-SDI SD-SDI Bit Rate 2.97Gbps 1.485Gbps 270Mbos Max. Link Distance (m) 300 500 1,000 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 V1.0 Optoway ABSOLUTE MAXIMUM RATINGS Absolute Maximum Ratings Parameter Storage Temperature O perating Case Temperature P ower Supply Voltage E SD Tolerance on all pins R elative Humidity Symbol Tstg Tc Vcc --Min -40 0 0 5 Max 85 70 4 1 95 Units o C o C V KV HBM % RH SPM-9100V-1TG 2 *********************************************************************************************************************************************************************** Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Notes non-condensing R ecommended Operating Conditions Parameter Symbol P ower Supply Voltage Vcc O perating Case Temperature Tc B aud Rate P ower Supply Current Icc Min 3.13 0 50 Typ 3.3 130 Max 3.47 70 3000 180 Units / Notes V o C Mb/s mA Transmitter Specifications (0 oC < Tc < 70 oC, 3.13V < Vcc < 3.47V) Parameter Optical O ptical Transmit Power Output Center Wavelength Output Spectrum Width E xtinction Ratio R elative Intensity Noise O ptical Rise Time / Fall Time Symbol Po λ ∆λ ER RIN tr / tf Min -7 830 --5 Typ Max -2 870 1 -118 135 270 800 1.5 200 0 2 .0 2 .5 0 1200 0 .8 Vcc+0.3 Vcc+0.3 0 .5 Units dBm nm nm dB dB/Hz ps ps ps ns mVp-p V V V V Notes 1 At 25oC RMS (σ) 850 7.5 2, SMPTE 424M 2, SMPTE 292M 2, SMPTE 344M 2, SMPTE 259M AC coupled input TX Output Enabled TX Ouput Disabled E lectrical D ifferential Input Voltage D isable Input Voltage -- Low D isable Input Voltage -- High SCL, SDA 1. 2. V IH - VIL VTDIS,L VTDIS,H V OH V OL Output power is power coupled into a 62.5/125 µm multi-mode fiber. 20% to 80%, unfiltered. MODULE DEFINITION Module Definition 4 PIN 5 SCL PIN 6 SDA Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 V1.0 Optoway CONNECTION DIAGRAM SPM-9100V-1TG 3 *********************************************************************************************************************************************************************** PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Name Vee NC NC Vee SCL SDA Vee NC NC NC Vee NC NC Vee NC Vcc TX Vee TX+ TXTX_DIS Function Signal Ground No Connection No Connection Signal Ground Serial I2C Clock Serial I2C Data Signal Ground No Connection No Connection No Connection Signal Ground No Connection No Connection Signal Ground No Connection Power Supply Signal Ground Positive Transmitter Data In Negative Transmitter Data In Transmitter Disable Notes +3.3V±5%, Internal connected AC coupled differential lines with 100 ohm differential termination inside the module Internal 4.7 kΩ pull-up. The bias current and modulation current are turned off if TX1_DIS = HIGH. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 V1.0 Optoway RECOMMENDED CIRCUIT SCHEMATIC 1 VCC 3.3V 2 3 10K I2C CLK I2C DA TA 10K 4 5 6 7 8 9 10 Vee NC NC Vee SCL SDA Vee NC NC NC TX_DIS TX TX + Vee Vcc_TX NC NC NC NC Vee 20 19 18 17 16 15 14 13 12 11 100nF 10uF 1uH 100nF 100Ω Differential TX_DIS SPM-9100V-1TG 4 *********************************************************************************************************************************************************************** TD Re-Clocker TD + 10uF VCC 3.3V 1. Consult the Chipset manufacturer’s applications information for biasing required for TX outputs. Some chipset outputs are internally biased and may not need external bias resistor. PACKAGE DIAGRAM (Units in mm) Note: Since the SPM-9100V-1TG is single channel device, the receptacle for channel 2 is not used. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 V1.0 Optoway REVISION HISTORY Version 1 .0 Initial datasheet SPM-9100V-1TG 5 *********************************************************************************************************************************************************************** Subject Release Date 2008/11/1 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 V1.0