SPS-2340MWG

Optoway SPS-2340MWG FEATURES DESCRIPTION SPS-2340MWG 1 *********************************************************************************************************************************************************************** (RoHS Compliant) 40km / 1550 nm / 10G Multirate Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER *********************************************************************************************************************************************************************** l l l l l l l l l l l l l Support 9.95 Gbps to 11.1Gbps Complaint with SFP+ MSA Compliant to IEEE 802.3ae 10GBASE-ER Compliant with OC-192 IR-2 / SDH STM S-64.2b SFF-8472 Digital Diagnostic Function Temperature-stabilized 1550 nm EML Transmitter Distance up to 40 km at SM Fiber AC/AC Coupling according to MSA Single +3.3 V Power Supply Low Power consumption (max. 1.5W) RoHS 6/6 Compliant 0 to 70oC Operating Class 1 Laser International Safety Standard IEC-60825 Compliant The SPS-2340MWG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as SONET OC-192 / SDH STM-64, 10G Ethernet 10GBASE-ER/EW and 10G Fibre Channel. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. The transmitter section uses a temperature-stabilized 1550 nm electrical-modulated laser (EML) and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. APPLICATIONS l SONET OC-192 IR-2 SDH STM S-64.2b SONET OC-192 IR-3 SDH STM S-64.3b ITU-T G.709 l 10GBASE-ER / EW l 40 km 10G Fibre Channel LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P /No. Bit Rate (Gb/s) 10G Distance (km) Wavelength (nm) Package Temp. (oC) RoHS Compliant SPS-2340MWG Multirate* 9.95 to 11.1 40 1550 EML SFP+ with DMI 0 to 70 Yes *: multirate for SONET OC-192 IR2, OC-192 IR-3, 10GBASE-ER/EW, 10G Fibre Channel, ITU-T G.709, 10GBASE-ER/EW + FEC Absolute Maximum Ratings Parameter Storage Temperature Relative Humidity Operating Case Temperature Power Supply Voltage Receiver Input Optical Power Symbol Tstg RH Topr Vcc Mip Min -40 5 0 -0.5 Max 85 85 70 3.6 3 Units o C % o C V dBm Notes Non-condensing Average power Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Relative Humidity Power Supply Current Data Rate Total Power Dissipation Symbol Vcc Topr RH ICC (TX+RX) 1 Min 3.135 0 5 Typ 3.3 85 320 10.3125 Max 3.465 70 % 450 11.1 1.5 Units / Notes V o C Non-condensing mA Gb/s W/1 Note 1: The inrush current is TBD. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 4 /1/2010 V1.0 Optoway Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, Avg λc σλ SMSR ER RIN Min -1 1530 30 8.2 -128 -30 Typ Max +2 1565 1 Units dBm nm nm dB dB/Hz dBm SPS-2340MWG Notes 2 -20 dB width 2 *********************************************************************************************************************************************************************** 2. Output power is power coupled into a 9/125 µm single-mode fiber. Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter S Sensitivity @ 9.95 to 10.7 Gb/s Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Symbol Sen1 P MAX LOSD LOSA λc Min -1 ---28 1530 Typ ------Max -16 -16 --1565 Units dBm dBm dBm dBm nm Notes 3 Transition: low to high Transition: high to low 3. Averaged power; BER < 10 -12 and PRBS 231-1. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min 9.95 100 120 9.95 100 340 850 820 11.1 Typ Max 11.1 Units Gb/s Ω mVpp Gb/s Ω mVpp Notes Internally AC coupled Internally AC coupled 2.0 GND 2.4 GND Vcc+0.3 0.8 Vcc 0.5 V V V V ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway CONNECTION DIAGRAM SPS-2340MWG 3 *********************************************************************************************************************************************************************** PIN Signal Name 1 2 VEET TX_Fault Description Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = Laser off, Logic “0” = Laser on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground PIN Signal Name 11 12 VEER RD- Description Receiver Signal Ground Inverse Receiver Data Out 3 4 5 6 7 TX_Disable SDA SDL MOD-ABS RS0 13 14 15 16 17 RD+ VEER VCCR VCCT VEET Receiver Data Out Receiver Signal Ground Receiver Power – 3 .3V±5% Transmitter Power – 3 .3V±5% Transmitter Signal Ground 8 9 RX_LOS RS1 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 10 VEER 20 VEET Transmitter Signal Ground MODULE DEFINITION Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT ( 1,17,20) 3 2 10 KΩ TD + 18 Z=50Ω TD 19 Z=50Ω Vcc T 16 0.1μF 4 .7 μH Vcc 3.3V 22 μF 0.1μF 0.1μF Vcc R 15 0.1μF 22 μF 4 .7 μH TD TD + SPS-2340MWG 4 *********************************************************************************************************************************************************************** Tx_DISABLE Tx_FAULT LD D river 100Ω SerDes IC Protocol IC RD - 12 Z=50Ω 100Ω RD - POST Amp RD + 13 Z=50Ω 10 KΩ RD + depending on SE D S RE LOSS OF SINGAL LOS Vee R RS1 30K Ω 30K Ω MOD_ABS RS0 8 ( 10,11,14) 9 7 TX Rate Select RX Rate Select 6 5 4 10 KΩ 10 KΩ 10 KΩ Vcc 3.3V MODU LE DETECT SCL SDA EEPROM SCL SDA SFP+ module PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway EEPROM Series ID Memory Contents (Address A0h) Addr. Hex ASCII 0 03 1 04 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 07 80 08 00 00 10 10 01 C0 06 6F 00 28 FF 00 00 00 00 4F 50 54 4F 57 41 59 20 20 20 20 20 Note SFP+ Addr. Hex ASCII 32 20 33 20 20 20 00 00 0E FA 53 50 53 2D 32 33 34 30 4D 57 47 20 20 20 20 20 30 30 30 30 06 0E 00 Addr. Hex ASCII Note 64 06 Cooled Tx, Power Level 2, 65 1A Txdis, Txfault, LOS enable 66 00 Up bit rate 67 00 Low bit rate NA 68 Serial number: each piece with Vendor IEEE 69 different serial OUI 70 number 71 Part Number 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 Revision, 88 depended on 89 version 90 91 1550 nm 92 93 Reserved 94 Checksum 0-62 95 Note SPS-2340MWG Addr. Hex ASCII 96 00 97 00 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 Date Code 117 118 119 120 121 122 123 Monitoring 124 Soft Control 125 SFF-8472V10.4 126 C hecksum 64-94 127 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Note Vendor specific EEPROM 5 *********************************************************************************************************************************************************************** 34 35 36 37 38 Long Distance (L) 39 Longwave Laser 40 (LL) Single Mode 41 (SM) 1200 / 800 42 Mbytes/sec 64B/66B 43 11.1Gbps 44 45 40km 46 >25.4km 47 48 49 50 51 O Vendor name 52 P 53 T 54 O 55 W 56 A 57 Y 58 59 60 61 62 63 LC 10G Base-ER IR-2 S P S 2 3 4 0 M W G 0 0 0 1 68 F0 04 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway EEPROM Series ID Memory Contents (Address A2h) Addr. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 SPS-2340MWG 6 *********************************************************************************************************************************************************************** Hex Note Addr. Hex Note Addr. Hex Note Addr. Hex 4B Temp. High 32 27 Rx Power High 64 00 For External Cal. 96 Alarm (75oC) Alarm (0dBm) 33 10 65 00 For External Cal. 97 00 FB Temp. Low 34 00 Rx Power Low 66 00 For External Cal. 98 Alarm(-5oC) Alarm (-18dBm) 00 35 9 E 67 00 For External Cal. 99 46 Temp. High 36 1F Rx Power High 68 3F For External Cal. 100 Warming(70 oC) 00 37 07 Warming (-1dBm) 69 80 For External Cal. 101 00 Temp. Low 38 00 Rx Power Low 70 00 For External Cal. 102 Warming (0 oC) 00 39 F B Warming(-16dBm) 71 00 For External Cal. 103 8C Voltage High 40 00 Reserved 72 00 For External Cal. 104 Alarm (3.6V) A0 41 00 Reserved 73 00 For External Cal. 105 75 Voltage Low 42 00 Reserved 74 00 For External Cal. 106 Alarm(3.0V) 30 43 00 Reserved 75 00 For External Cal. 107 88 Voltage High 44 00 Reserved 76 01 For External Cal. 108 Warming(3.5V) B8 45 00 Reserved 77 00 For External Cal. 109 79 voltage Low 46 00 Reserved 78 00 For External Cal. 110 Warming (3.1V) 18 Reserved 79 00 For External Cal. 111 47 00 EA T x Bias High 48 00 Reserved 80 01 For External Cal. 112 Alarm(120mA) 60 49 00 Reserved 81 00 For External Cal. 113 27 Tx BiasLow 50 00 Reserved 82 00 For External Cal. 114 Alarm(20mA) 10 51 00 Reserved 83 00 For External Cal. 115 D6 52 00 Reserved 84 01 For External Cal. 116 Tx Bias High Warming(110mA) 53 00 D8 Reserved 85 00 For External Cal. 117 3A 54 00 Reserved 86 00 For External Cal. 118 Tx Bias Low Warming(30mA) 98 55 00 Reserved 87 00 For External Cal. 119 4D Tx Power High 56 00 For External Cal. 88 01 For External Cal. 120 Alarm (3dBm)) F1 57 00 For External Cal. 89 00 For External Cal. 121 18 T x Power Low 58 00 For External Cal. 90 00 For External Cal. 122 Alarm(-2dBm) A6 59 00 For External Cal. 91 00 For External Cal. 123 3D Tx Power High 60 00 For External Cal. 92 00 For External Cal. 124 E9 Warming(2dBm) 61 00 For External Cal. 93 00 For External Cal. 125 1F T x Power Low 62 00 For External Cal. 94 00 For External Cal. 126 07 Warming (-1dBm) 63 00 For External Cal. 95 Check Sum 127 Note: Address 128 – 247: customer R/W eeprom. Address 248 – 255: V endor Specific. Note: Specifications subject to change without notice. Note Real Time Temp. MSB Real Time Temp. LSB Real Time Vcc MSB Real Time Vcc LSB Real Time Tx Bias MSB Real Time Tx Bias LSB Real Time Tx Pwr MSB Real Time Tx Pwr LSB Real Time Rx Pwr MSB Real Time Rx Pwr LSB Reserved Reserved Reserved Reserved T x Dis, Tx Fault, Rx Los Reserved Alarm Flag Alarm Flag/Reserved Reserved Reserved Warming Flag Warming Flag/Reserved Reserved Reserved Vendor Specific ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway REVISION HISTORY V ersion 1 .0 Initial datasheet SPS-2340MWG 7 *********************************************************************************************************************************************************************** Subject Release Date 2010/4/1 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 4/1/2010 V1.0