SPS-2380WG

Optoway SPS-2380WG / SPS-2380BWG / SPS-2380AWG FEATURES l l l l l l l l l l l l l l Support 9.95 Gbps to 10.5 Gbps Complaint with SFP+ MSA Compliant to IEEE 802.3ae 10GBASE-ZR/ZW SFF-8472 Digital Diagnostic Function Temperature-stabilized 1550 nm EML Transmitter Distance up to 80 km at SM Fiber AC/AC Coupling according to MSA Single +3.3 V Power Supply Low Power Consumption RoHS 6/6 Compliant 0 to 70oC Operating: SPS-2380WG -5 to 85oC Operating: SPS-2380BWG -40 to 85oC Operating: SPS-2380AWG Class 1 Laser International Safety Standard IEC-60825 Compliant SPS-2380WG 1 *********************************************************************************************************************************************************************** (RoHS Compliant) 10.3 Gb/s / 80 km / 1550 nm Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER *********************************************************************************************************************************************************************** DESCRIPTION The SPS-2380WG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-ZR/ZW and 10G Fibre Channel. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. The transmitter section uses a temperature-stabilized 1550 nm electrical-modulated laser (EML) and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs avalanche photo detector preamplifier mounted in an optical header and a limiting post-amplifier IC. LASER SAFETY APPLICATIONS l 10GBASE-ZR/ZW l OC-192 / STM-64 LR2 l 80 km 10G Fibre Channel This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. 10GBASE ZR / ZW ZR / ZW ZR / ZW Distance (km) 80 80 80 Wavelength (nm) 1550 EML 1550 EML 1550 EML Package SFP+ with DMI SFP+ with DMI SFP+ with DMI Temp. (oC) 0 to 70 -5 to 85 -40 to 85 RoHS Compliant Yes Yes Yes ORDER INFORMATION P/No. Bit Rate (Gb/s) 10.3 10.3 10.3 SPS-2380WG SPS-2380BWG SPS-2380AWG Absolute Maximum Ratings Parameter Storage Temperature Relative Humidity Operating Case Temperature Symbol Tstg RH Topr Min -40 5 0 -5 -40 -0.5 Max 85 85 70 85 85 3.6 -4 Units o C % o C Notes Non-condensing SPS-2380WG SPS-2380BWG SPS-2380AWG Average power Power Supply Voltage Receiver Input Optical Power Vcc Mip V dBm Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Symbol Vcc Topr Min 3.135 0 -5 -40 5 Typ 3.3 Max 3.465 70 85 85 % 500 650 10.5 Units / Notes V o C / SPS-2380WG o C / SPS-2380BWG o C / SPS-2380AWG Non-condensing mA / SPS-2380WG mA / SPS-2380A(B)WG Gb/s Relative Humidity Power Supply Current Data Rate RH ICC (TX+RX) 85 330 350 9.95 / 10.3 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0 Optoway Transmitter Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Relative Intensity Noise Transmitter and Dispersion Penalty Average Launch Power of OFF Transmitter Symbol Po, Avg λc σλ SMSR ER RIN TDP Min 0 1530 30 8.2 -130 3 -30 Typ 1550 Max +4 1565 1 Units dBm nm nm dB dB/Hz dB dBm SPS-2380WG Notes 1 -20 dB width 2 *********************************************************************************************************************************************************************** 1. Output power is power coupled into a 9/125 µm single-mode fiber. Receiver Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Sensitivity in Average Power Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Symbol Sen1 PMAX LOSD LOSA λc Min -7 ---35 1530 Typ ------Max -23 -27 --1565 Units dBm dBm dBm dBm nm Notes 2 Transition: low to high Transition: high to low 2. Measured with average power; BER < 10-12 and PRBS 231-1 at 10.3125 Gb/s.. Electrical Characteristics Parameter Symbol Min Typ 9.95 / 10.3 100 120 9.95 / 10.3 100 340 Max 10.5 820 10.5 850 Units Gb/s Ω mVpp Gb/s Ω mVpp Notes High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Internally AC coupled Internally AC coupled 2.0 GND 2.4 GND Vcc+0.3 0.8 Vcc 0.5 V V V V ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0 Optoway CONNECTION DIAGRAM SPS-2380WG 3 *********************************************************************************************************************************************************************** PIN Signal Name 1 2 VEET TX_Fault Description Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = Laser off, Logic “0” = Laser on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground PIN Signal Name 11 12 VEER RD- Description Receiver Signal Ground Inverse Receiver Data Out 3 4 5 6 7 TX_Disable SDA SDL MOD-ABS RS0 13 14 15 16 17 RD+ VEER VCCR VCCT VEET Receiver Data Out Receiver Signal Ground Receiver Power – 3.3V±5% Transmitter Power – 3.3V±5% Transmitter Signal Ground 8 9 RX_LOS RS1 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 10 VEER 20 VEET Transmitter Signal Ground MODULE DEFINITION Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0 Optoway RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT (1,17,20) 3 2 10 KΩ TD + 18 Z=50Ω TD 19 Z=50Ω Vcc T 16 0.1μF 4 .7 μH Vcc 3.3V 22 μF 0.1μF 0.1μF Vcc R 15 0.1μF 22 μF 4 .7 μH TD TD + SPS-2380WG 4 *********************************************************************************************************************************************************************** Tx_DISABLE Tx_FAULT LD Driver 100Ω SerDes IC Protocol IC RD - 12 Z=50Ω 100Ω RD - POST Amp RD + 13 Z=50Ω 10 KΩ RD + depending on SERDES LOSS OF SINGAL LOS Vee R RS1 30K Ω 30K Ω MOD_ABS RS0 8 (10,11,14) 9 7 TX Rate Select RX Rate Select 6 5 4 10 KΩ 10 KΩ 10 KΩ Vcc 3.3V MODULE DETECT SCL SDA EEPROM SCL SDA SFP+ module PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0 Optoway REVISION HISTORY Version 1.0 2.0 SPS-2380WG 5 *********************************************************************************************************************************************************************** Subject Initial datasheet 1) Add SPS-2380BWG for extended temperature version 2) Add SPS-2380AWG for industrial temperature version Release Date 2010/7/1 2010/12/1 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0