Optoway
SPS-4341W-DXXG
FEATURES
l l l l l l l l l l l l l Up to 8.5 Gbps Bi-directional Data Links Complaint to SFP+ MSA Compliance with Fibre Channel FC-PI-4 800-SM-LC-L Compliant with 4G and, 2G Fibre Channel Temperature-stabilized DWDM EML Transmitter 100 GHz ITU Grid, C Band Distance up to 40 km SFF-8472 Digital Diagnostic Function AC/AC Coupling according to MSA Single +3.3 V Power Supply RoHS 6/6 Compliant 0 to 70oC Operating Class 1 Laser International Safety Standard IEC-60825 Compliant
SPS-4341W-DXXG
1
***********************************************************************************************************************************************************************
(RoHS Compliant)
DESCRIPTION
The SPS-4341W-DXXG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as 8x/4x/2x Fibre Channel. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 100GHz ITU Grid, C Band DWDM wavelength. A guaranteed minimum optical link budget of 14 dB is offered. The transmitter section consists of a temperature-stabilized DWDM electrical-modulated laser (EML), driver and signal conditioner. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
8.5 Gbps/ DWDM / 40 km Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
APPLICATIONS
l Multi-rate 8x / 4x / 2x Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw
12/1/2010 V2.0
Optoway
ORDER INFORMATION
P/No. Bit Rate (Gb/s) 8/4/2 FC-PI
FC-PI-4
SPS-4341W-DXXG
2
***********************************************************************************************************************************************************************
Power Budget Wavelength (dB) (nm) > 14 DWDM*
Package SFP+ with DMI
Temp. (oC) 0 to 70
RoHS Compliant Yes
SPS-4341W-DXXG Channel # 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
*: XX: 100GHz ITU Grid wavelength (Please see below)
Product code SPS-4341W-D21G SPS-4341W-D22G SPS-4341W-D23G SPS-4341W-D24G SPS-4341W-D25G SPS-4341W-D26G SPS-4341W-D27G SPS-4341W-D28G SPS-4341W-D29G SPS-4341W-D30G SPS-4341W-D31G SPS-4341W-D32G SPS-4341W-D33G SPS-4341W-D34G SPS-4341W-D35G SPS-4341W-D36G SPS-4341W-D37G SPS-4341W-D38G SPS-4341W-D39G SPS-4341W-D40G SPS-4341W-D41G SPS-4341W-D42G SPS-4341W-D43G SPS-4341W-D44G SPS-4341W-D45G SPS-4341W-D46G SPS-4341W-D47G SPS-4341W-D48G SPS-4341W-D49G SPS-4341W-D50G SPS-4341W-D51G SPS-4341W-D52G SPS-4341W-D53G SPS-4341W-D54G SPS-4341W-D55G SPS-4341W-D56G SPS-4341W-D57G SPS-4341W-D58G SPS-4341W-D59G SPS-4341W-D60G Frequency (THz) 192.1 192.2 192.3 192.4 192.5 192.6 192.7 192.8 192.9 193.0 193.1 193.2 193.3 193.4 193.5 193.6 193.7 193.8 193.9 194.0 194.1 194.2 194.3 194.4 194.5 194.6 194.7 194.8 194.9 195.0 195.1 195.2 195.3 195.4 195.5 195.6 195.7 195.8 195.9 196.0 Center Wavelength (nm) 1560.61 1559.79 1558.98 1558.17 1557.36 1556.55 1555.75 1554.94 1554.13 1553.33 1552.52 1551.72 1550.92 1550.12 1549.32 1548.51 1547.72 1546.92 1546.12 1545.32 1544.53 1543.73 1542.94 1542.14 1541.35 1540.56 1539.77 1538.98 1538.19 1537.40 1536.61 1535.82 1535.04 1534.25 1533.47 1532.68 1531.90 1531.12 1530.33 1529.55 Label D21 D22 D23 D24 D25 D26 D27 D28 D29 D30 D31 D32 D33 D34 D35 D36 D37 D38 D39 D40 D41 D42 D43 D44 D45 D46 D47 D48 D49 D50 D51 D52 D53 D54 D55 D56 D57 D58 D59 D60
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0
Optoway
Absolute Maximum Ratings
Parameter Storage Temperature Operating Case Temperature Power Supply Voltage Symbol Tstg Topr Vcc Min -40 0 -0.5 Max 85 70 3.6 Units o C o C V
SPS-4341W-DXXG
Notes
3
***********************************************************************************************************************************************************************
Recommended Operating Conditions
Parameter Power Supply Voltage Operating Case Temperature Power Supply Current Data Rate Symbol Vcc Topr ICC (TX+RX) 2.125 Min 3.13 0 Typ 3.3 330 8.5 Max 3.47 70 500 Units / Notes V o C mA Gb/s
Transmitter Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter Average Launch Power Extinction Ratio Center Wavelength Spacing Transmitter Center Wavelength -- over life time Output Spectrum Width Side Mode Suppression Ratio Transmitter and Dispersion Penalty @ 800 ps/nm Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, AVG ER λc ∆λ SMSR TDP RIN Min -2 8.2 X-100 --30 Typ Max 2 Units dBm dB GHz pm nm dB dB dB/Hz dBm Notes 1 2 3 -20 dB width
100 X
X+100 1 2 -130 -30
1. Output power is power coupled into a 9/125 µm single-mode fiber. 2. Corresponds to approximately 0.8 nm. 3. X = specified ITU Grid wavelength.
Receiver Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter Sensitivity Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Symbol PMAX LOSD LOSA λc Min -1 ---26 1480 Typ ------Max -16 -16 --1580 Units dBm dBm dBm dBm nm Notes 4 Transition: low to high Transition: high to low
4. Measured with average power; BER < 10-12 and PRBS 27-1.
Electrical Characteristics
Parameter Symbol Min 2.125 150 2.125 350 Typ 8.5 100 1200 8.5 100 600 Max Units Gb/s Ω mVpp Gb/s Ω mVpp Notes High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage
Internally AC coupled
700
Internally AC coupled
2.0
Vcc+0.3
V
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0
Optoway
Input Low Voltage Output High Voltage Output Low Voltage GND 2.4 GND 0.8 Vcc 0.5 V V V
SPS-4341W-DXXG
4
***********************************************************************************************************************************************************************
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0
Optoway
CONNECTION DIAGRAM
SPS-4341W-DXXG
5
***********************************************************************************************************************************************************************
PIN Signal Name
1 2 VEET TX_Fault
Description
Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = Laser off, Logic “0” = Laser on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground
PIN Signal Name
11 12 VEER RD-
Description
Receiver Signal Ground Inverse Receiver Data Out
3 4 5 6 7
TX_Disable SDA SDL MOD-ABS RS0
13 14 15 16 17
RD+ VEER VCCR VCCT VEET
Receiver Data Out Receiver Signal Ground Receiver Power – 3.3V±5% Transmitter Power – 3.3V±5% Transmitter Signal Ground
8 9
RX_LOS RS1
18 19
TD+ TD-
Transmitter Data In Inverse Transmitter Data In
10
VEER
20
VEET
Transmitter Signal Ground
MODULE DEFINITION
Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0
Optoway
RECOMMENDED CIRCUIT SCHEMATIC
Vee T Tx_DISABLE Tx_FAULT (1,17,20) 3 2 10 KΩ TD + 18 Z=50Ω TD 19 Z=50Ω Vcc T 16 0.1μF 4 .7 μH Vcc 3.3V 22 μF 0.1μF 0.1μF Vcc R 15 0.1μF 22 μF 4 .7 μH TD TD +
SPS-4341W-DXXG
6
***********************************************************************************************************************************************************************
Tx_DISABLE Tx_FAULT
LD Driver
100Ω
SerDes IC
Protocol IC
RD -
12 Z=50Ω 100Ω
RD -
POST Amp
RD +
13 Z=50Ω 10 KΩ
RD +
depending on SERDES
LOSS OF SINGAL
LOS Vee R RS1 30K Ω 30K Ω MOD_ABS RS0
8 (10,11,14) 9 7 TX Rate Select RX Rate Select
6 5 4 10 KΩ 10 KΩ 10 KΩ Vcc 3.3V
MODULE DETECT SCL SDA
EEPROM
SCL SDA
SFP+ module
PACKAGE DIAGRAM
Units in mm
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0
Optoway
REVISION HISTORY
Version
1.0 2.0 Initial datasheet Update Transmitter power to -2 to +2 dBm
SPS-4341W-DXXG
7
***********************************************************************************************************************************************************************
Subject
Release Date
2010/4/1 2010/12/1
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 12/1/2010 V2.0