SPS-5380AWG

Optoway FEATURES DESCRIPTION SPS-5380WG 1 *********************************************************************************************************************************************************************** SPS-5380WG / SPS-5380BWG / SPS-5380AWG (RoHS Compliant) 3.3V / 1550 nm / 622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER ********************************************************************************************************************************************************************** l Hot-Pluggable SFP Footprint LC Optical Transceiver l Small Form-Factor Pluggable (SFP) MSA compatible l Compliant with Long-Reach SONET OC-12 / SDH STM-4 (L-4.2) l SFF-8472 Digital Diagnostic Function l 1550 nm DFB LD Transmitter l 26 dB Power Budget at Least l AC/AC Coupling according to MSA l Single +3.3 V Power Supply l RoHS Compliant l 0 to 70oC Operation: SPS-5380WG l -10 to 85oC Operation: SPS-5380BWG l -40 to 85oC Operation: SPS-5380AWG l Class 1 Laser International Safety Standard IEC-60825 Compliant The SPS-5380WG series single mode transceivers is small form factor pluggable module for bi-directional serial optical data communications such as SONET OC-12 / SDH STM-4 and Fiber Channel. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. The transmitter section uses a multiple quantum well 1550 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l l l l ATM Switches and Routers SONET / SDH Switch Infrastructure XDSL Applications Metro Edge Switching ORDER INFORMATION P /No. SPS-5380WG SPS-5380BWG SPS-5380AWG Bit Rate (Mb/s) 622 622 622 SONET /SDH LR-2/L-4.2 LR-2/L-4.2 LR-2/L-4.2 Distance Wavelength (km) (nm) 80 80 80 Package Temp. (oC) 0 to 70 -10 to 85 -40 to 85 TX Power RX Sens. RoHS (dBm) (dBm) Compliant 2 to -3 2 to -3 2 to -3 -29 -29 -29 Yes Yes Yes 1550 DFB LC SFP with DMI 1550 DFB LC SFP with DMI 1550 DFB LC SFP with DMI Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Symbol Tstg Topr Min -40 0 -10 -40 -0.5 Max 85 70 85 85 3.6 Units o C o C Notes SPS-5380WG SPS-5380BWG SPS-5380AWG Power Supply Voltage Vcc V Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Symbol Vcc Topr Min 3.1 0 -10 -40 Typ 3.3 Max 3.5 70 85 85 300 Units / Notes V o C / SPS-5380WG o C / SPS-5380BWG o C / SPS-5380AWG mA Mb/s Power Supply Current Data Rate ICC (TX+RX) 200 622 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V3.0 Optoway Transmitter Specifications (0 oC < Topr < 70 oC, 3.1V < Vcc < 3.5V) SPS-5380WG 2 *********************************************************************************************************************************************************************** Parameter Symbol Min Typ Max Units Notes Optical Optical Transmit Power Po -3 --2 dBm 1 Output Center Wavelength 1480 1550 1580 nm λ Output Spectrum Width ----1 nm -20 dB Width ∆λ Side Mode Suppression Ratio SMSR 30 dB Extinction Ratio ER 10 ----dB Output Eye Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 Optical Rise Time tr 1 .2 ns 10 % to 90% Values Optical Fall Time tf 1 .2 ns 10 % to 90% Values Relative Intensity Noise RIN -120 dB/Hz Electrical Data Input Current – Low IIL -350 µA Data Input Current – High IIH 350 µA Differential Input Voltage VIH - V IL 0.5 2.4 V Peak-to-Peak TX Disable Input Voltage – Low TDIS, L 0 0 .5 V 2 TX Disable Input Voltage – High TDIS, H 2.0 Vcc V 2 TX Disable Assert Time T ASSERT 1 ms TX Disable Deassert Time TDEASSERT 50 µs TX Fault Output Voltage -- Low TFaultL 0 0 .5 V 3 TX Fault Output Voltage -- High TFaultH 2.0 Vcc+0.3 V 3 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX. 3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage). Receiver Specifications (0oC < Topr < 70oC, 3.1V < Vcc