SPS-7110VW-1RG

Optoway SPS-7110VW-1RG 1260 to 1620 nm / 1.5 Gb/s Single Optical SM Digital Diagnostic Receiver FEATURES DESCRIPTION SPS-7110VW-1RG 1 *********************************************************************************************************************************************************************** (RoHS Compliant) ********************************************************************************************************************************************************************** l SMPTE 292M/297M/259M Compatible l Speed from 50 Mbps to 1.5 Gbps l Support Video Pathological Patterns for SD-SDI and HD-SDI l Single Receiver with Simplex LC l Based on Industry Standard SFP l SFF-8472 Digital Diagnostic Function l Single +3.3 V Power Supply l RoHS-6 Compliant l 0 to 70oC Operation l Hot Pluggable The SPS-7110VW-1RG is a single channel optical single mode receiver module designed to receive optical serial digital signals as defined in SMPTE 292M/297M/259M. It supports from 50 Mbps to 1.5 Gbps and is specifically designed for received the SMPTE 292M, SMPTE 297M and SMPTE 259M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. APPLICATIONS l SMPTE 292M/297M/259M Compliant Electrical-to-Optical Interfaces l High-density Video Routers ORDER INFORMATION P /No. Type RX1 λ Sen. (nm) (dBm) 50 to 1500 1260/1620 0 to -20 Bit Rate (Mb/s) Bit Rate (Mb/s) 50 to 1500 TX1 λ (nm) 1310 Power (dBm) 0 to -7 λ (nm) RX2 λ (nm) Sen. (dBm) LC SFP with DMI TX2 Power (dBm) LC SFP with DMI Package Package Temp (oC) 0 to 70 Temp (oC) 0 to 70 RoHS Compliant Yes RoHS Compliant Yes SPS-7110VW-1RG P /No. 1-RX Type RELATED PRODUCTS SPS-7110VW-1TG 1-TX LINK DISTANCE Transmitter SPS-7110VW-1TG Receiver SPS-7110VW-1RG SD-SDI 270Mbos 30 SDI HD-SDI Bit Rate 1.485Gbps Max. Link Distance (km) 21 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 0/1/2008 V1.0 Optoway ABSOLUTE MAXIMUM RATINGS Absolute Maximum Ratings Parameter Storage Temperature O perating Case Temperature P ower Supply Voltage E SD Tolerance on all pins R elative Humidity Symbol Tstg Tc Vcc --Min -40 0 0 5 Max 85 70 4 1 95 Units o C o C V KV HBM % RH SPS-7110VW-1RG 2 *********************************************************************************************************************************************************************** Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Notes non-condensing R ecommended Operating Conditions Parameter Symbol P ower Supply Voltage Vcc O perating Case Temperature Tc B aud Rate P ower Supply Current Icc Min 3.13 0 50 Typ 3.3 1485 120 Max 3.47 70 1500 160 Units / Notes V o C Mb/s mA Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Wavelength of Operation Sensitivity for SMPTE 292M 1.485 Gb/s Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Optical Return Loss Electrical CML Output (Differential) Optical Rise Time / Fall Time Output LOS Voltage -- Low Output LOS Voltage -- High SCL, SDA 1. 20% to 80%, unfiltered. Symbol Min 1260 0 0 ---31 1 Typ ---------27 550 tr / tf V OL V OH V OH V OL 0 2 .5 2 .5 0 660 850 270 800 1.5 0 .5 Vcc+0.3 Vcc+0.3 0 .5 Max 1620 -18 -20 -21 --6 Units nm dBm dBm dBm dBm dB dB mVp-p ps ps ns V V V V Notes Sen Pa Pd Pathological PRBS 223-1, BER=1E-12 Transition: low to high Transition: high to low AC coupled output 1, SMPTE 292M 1, SMPTE 344M 1, SMPTE 259M IOL=-1.6mA, 1 TTL unit load IOH=40µ A, 1 TTL unit load MODULE DEFINITION Module Definition 4 PIN 5 SCL PIN 6 SDA Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway CONNECTION DIAGRAM SPS-7110VW-1RG 3 *********************************************************************************************************************************************************************** PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Name Vee NC NC Vee SCL SDA Vee NC NC NC Vee RXRX+ Vee Vcc RX NC Vee NC NC NC Function Signal Ground No Connection No Connection Signal Ground Serial I2C Clock Serial I2C Data Signal Ground No Connection No Connection No Connection Signal Ground Negative Differential Output Positive Differential Output Signal Ground Power Supply No Connection Signal Ground No Connection No Connection No Connection Notes +3.3V±5%, Internal connected *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway RECOMMENDED CIRCUIT SCHEMATIC 1 2 3 4 VCC 3.3V 5 4.7K 4. 7K I2C CLK I2C DA TA 6 7 8 9 10 Vee NC NC Vee SCL SDA Vee NC NC NC NC NC NC Vee NC Vcc_RX Vee RX + RX Vee 20 19 18 17 16 15 14 13 12 11 100nF SPS-7110VW-1RG 4 *********************************************************************************************************************************************************************** VCC 3.3V 1uH 10uF 100nF 10uF RD + 100Ω Differential RD Re-Clocker 1. Consult Chipset manufacturer’s data sheet and application data for appropriate receiver input biasing network. PACKAGE DIAGRAM (Units in mm) Note: Since the SPS-7110VW-1RG is single channel device, the receptacle for channel 2 is not used. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway REVISION HISTORY Version 1 .0 Initial datasheet SPS-7110VW-1RG Subject Release Date 2008/10/1 5 *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 V1.0