Optoway
SPS-9110V-1T1RG
1310 nm / 3 Gb/s Medium Power Optical SM Transmitter/Receiver FEATURES DESCRIPTION
SPS-9110V-1T1RG
1
***********************************************************************************************************************************************************************
(RoHS Compliant)
**********************************************************************************************************************************************************************
l SMPTE 297-2006 Compatible l Speed from 50 Mbps to 3Gbps with up to 30 km Single-mode Fiber l D istance up to 10 km for 3G-SDI l Support Video Pathological Patterns for SD-SDI, HD-SDI and 3G-SDI l Single Transmitter with Simplex LC l Single Receiver with Simplex LC l Based on Industry Standard SFP l TTL Laser Disable Input l TTL TX_Fault Output l TTL RX_LOS Output l Single +3.3 V Power Supply l RoHS-6 Compliant l 0 to 70oC Operation l Hot Pluggable l Class 1 Laser International Safety Standard IEC-60825 Compliant
The SPS-9110V-1T1RG is a optical single mode transmitter/receiver module designed to transmit/receive optical serial digital signals as defined in SMPTE 297-2006. It supports from 50 Mbps to 3 Gbps and is specifically designed for transmitted the SMPTE 259M, SMPTE 344M, SMPTE 292M and SMPTE 424M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability.. It is with 1310 nm laser transmitters. The transmitter can transmit signal from 50 Mbps to 3 Gbps with up to 30 km of single-mode fiber. A maximum distance of 10 km is achievable with 3Gbps pathological signals.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
APPLICATIONS
l SMPTE 297-2006 Compliant Electrical-to-Optical Interfaces l High-density Video Routers
ORDER INFORMATION
P /No. Type Bit Rate (Mb/s) TX λ (nm) 1310 TX λ (nm) 1310 1310 Power (dBm) 0 to -5 0 to -5 λ (nm) Power (dBm) 0 to -5 RX λ Sen. (nm) (dBm) 1260/1620 0 to -20 RX Sen. (dBm) LC SFP LC SFP LC SFP LC SFP Package Temp (oC) 0 to 70 Temp (oC) 0 to 70 0 to 70 0 to 70 0 to 70 RoHS Compliant Yes RoHS Compliant Yes Yes Yes Yes
SPS-9110V-1T1RG P /No.
1-TX+1-RX 50 to 3000 Type Bit Rate (Mb/s) 50 to 3000 50 to 3000 50 to 3000 50 to 3000
LC SFP Package
RELATED PRODUCTS
SPS-9110V-2TG SPS-9110V-1TG SPS-9110V-2RG SPS-9110V-1RG
2-TX 1-TX 2-RX 1-RX
1260/1620 0 to -20 1260/1620 0 to -20
LINK DISTANCE
Transmitter SPS-9110V-2TG or SPS-9110V-1TG or SPS-9110V-1T1RG Receiver SPS-9110V-2RG or SPS-9110V-1RG or SPS-9110V-1T1RG SDI 3 G-SDI HD-SDI SD-SDI Bit Rate 2.97Gbps 1.485Gbps 270Mbos Max. Link Distance (km) 10 21 30
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
3/1/2009 V2.0
Optoway
Absolute Maximum Ratings
Absolute Maximum Ratings Parameter Storage Temperature O perating Case Temperature P ower Supply Voltage E SD Tolerance on all pins R elative Humidity Symbol Tstg Tc Vcc --Min -40 -20 0 5 Max 85 85 4 1 95 Units o C o C V KV HBM % RH
SPS-9110V-1T1RG
2
***********************************************************************************************************************************************************************
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Notes
non-condensing
R ecommended Operating Conditions Parameter Symbol P ower Supply Voltage Vcc O perating Case Temperature Tc B aud Rate P ower Supply Current Icc
Min 3.13 0 50
Typ 3.3
200
Max 3.47 70 3000 300
Units / Notes V o C Mb/s mA
Transmitter Specifications (0 oC < Tc < 70 oC, 3.13V < Vcc < 3.47V)
Parameter Optical O ptical Transmit Power Output Center Wavelength Output Spectrum Width E xtinction Ratio R elative Intensity Noise O ptical Rise Time / Fall Time Symbol Po λ ∆λ ER RIN tr / tf Min -5 1290 --5 Typ -2 1310 1.5 7.5 Max 0 1330 3 -120 135 270 800 1.5 200 0 2 .0 0 2 .5 2 .5 0 1200 0 .8 Vcc+0.3 0 .5 Vcc+0.3 Vcc+0.3 0 .5 Units dBm nm nm dB dB/Hz ps ps ps ns mVp-p V V V V V V Notes 1 At 25oC RMS (σ)
2, SMPTE 424M 2, SMPTE 292M 2, SMPTE 344M 2, SMPTE 259M AC coupled input TX Output Enabled TX Ouput Disabled
E lectrical D ifferential Input Voltage D isable Input Voltage -- Low D isable Input Voltage -- High Output TX_Fault -- Low Output TX_Fault -- High SCL, SDA 1. 2.
V IH - VIL VTDIS,L VTDIS,H V OL V OH V OH V OL
Output power is power coupled into a 9/125 µm single mode fiber. 20% to 80%, unfiltered.
Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V)
Parameter Optical Wavelength of Operation Sensitivity for SMPTE 424M 2.97 Gb/s Sensitivity for SMPTE 292M 1.485 Gb/s Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Optical Return Loss Symbol Min 1260 0 0 0 0 ---29 1 Typ -----------27 Max 1620 -18 -20 -20 -21 -23 --6 Units nm dBm dBm dBm dBm dBm dBm dB dB Notes
Sen Sen Pa Pd
Pathological PRBS 223-1, BER=1E-12 Pathological PRBS 223-1, BER=1E-12 Transition: low to high Transition: high to low
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
3 /1/2009 V2.0
Optoway
Electrical CML Output (Differential) 550 660 Optical Rise Time / Fall Time tr / tf 850 135 270 800 1.5 0 .5 Vcc+0.3 Vcc+0.3 0 .5
SPS-9110V-1T1RG
mVp-p ps ps ps ns V V V V AC coupled output 3, SMPTE 424M 3, SMPTE 292M 3, SMPTE 344M 3, SMPTE 259M
3
***********************************************************************************************************************************************************************
Output LOS Voltage -- Low Output LOS Voltage -- High SCL, SDA 3. 20% to 80%, unfiltered.
V OL V OH V OH V OL
0 2 .5 2 .5 0
IOL=-1.6mA, 1 TTL unit load IOH=40µ A, 1 TTL unit load
MODULE DEFINITION
Module Definition 4 PIN 5 SCL PIN 6 SDA Interpretation by Host Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
3 /1/2009 V2.0
Optoway
CONNECTION DIAGRAM
SPS-9110V-1T1RG
4
***********************************************************************************************************************************************************************
PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Name Vee TX_Fault NC Vee SCL SDA Vee RX_LOS NC NC Vee RXRX+ Vee Vcc RX Vcc TX Vee TX+ TXTX_DIS
Function Signal Ground Transmitter Fault Indicator (Active high, open-drain) No Connection Signal Ground Serial I2C Clock Serial I2C Data Signal Ground Receiver Loss of Signal Indicator (Active high, open-drain) No Connection No Connection Signal Ground Negative Differential Output Positive Differential Output Signal Ground Power Supply Power Supply Signal Ground Positive Transmitter Data In Negative Transmitter Data In Transmitter Disable
Notes
+3.3V±5%, Internal connected
AC coupled differential lines with 100 ohm differential termination inside the module Internal 4.7 kΩ pull-up. The bias current and modulation current are turned off if TX1_DIS = HIGH.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
3 /1/2009 V2.0
Optoway
RECOMMENDED CIRCUIT SCHEMATIC
VCC 3.3 V 1 4.7K TX_FA ULT VCC 3.3 V 5 4.7K I2C CLK I2C DA TA RX_LOS 4.7K 4.7K 6 7 8 9 10 2 3 4 Vee TX_FA ULT NC Vee SCL SDA Vee RX_LOS NC NC TX_DIS TX TX + Vee Vcc _TX Vcc _RX Vee RX + RX Vee 20 19 18 17 16 15 14 13 12 11 10 0nF 10 0nF 10 uF TX_DIS
SPS-9110V-1T1RG
5
***********************************************************************************************************************************************************************
TD 10 Ω Differential 0 TD + 1uH 1uH 10 uF 10 0nF 10 uF VCC 3.3 V Re-Cloc ker
RD + 10 Ω Differential 0 Re-Cloc ker RD -
VCC 3.3 V
1. Consult the Chipset manufacturer’s applications information for biasing required for TX outputs. Some chipset outputs are internally biased and may not need external bias resistor.
PACKAGE DIAGRAM (Units in mm)
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
3 /1/2009 V2.0
Optoway
REVISION HISTORY
Version
1 .0 2 .0 Initial datasheet Add TX_Fault and RX_LOS function
SPS-9110V-1T1RG
6
***********************************************************************************************************************************************************************
Subject
Release Date
2008/10/1 2009/3/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
3 /1/2009 V2.0
